Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Shimano revo shift issue
#1
Hi, I have a revo shift sl-rs43-7. The numbers on the shifter do not line up with the gears i am actually in, to get on the largest gear, i am 2 clicks below the 1, in the smallest gear, i am on number 5 not number 7.
A separate issue is that sometimes it takes two clicks to go one gear shift, and sometimes goes 2 gears on 1 click. it seems to eventually get back to the original misaligned position, ie, 2 clicks below the 1 for the largest gear, in the smallest gear, i am on number 5. Any advice to repair, or should it be replaced?
thanks
jeff
  Reply
#2
sounds like the cable needs to be adjusted. Typically something done about 10 miles after purchase or a new shift cable is installed; then never again.
Nigel
  Reply
#3
Welcome to the forum.
You could sign up for the bike repair guide. As nfmisso said, first inspect & adjust the cable. On my old cruiser it was the actual shifter, (I found a crack in the "ratchet tooth") which is very inexpensive. My symptom was it always took excess effort & movement to go to a bigger cog & would shift a gear too far going to a smaller. I went with a SRAM MRX. The Revo looks better to me.
  Reply
#4
Thanks for the info. Saturday I'll attempt to correct and post results.
  Reply
#5
(08-15-2013, 09:14 PM)poppajeff Wrote:  Thanks for the info. Saturday I'll attempt to correct and post results.
Just looking for a solution to my revoshift - the scale seems to have shifted - the first click is at "zero" and the highest is at 6. It won't go to 7 at all. Is this swimilar to the problem you had? If so I would like to knowe what you did, or find a reliable link to a manual online.
Hope you don't mind me asking.


George
  Reply
#6
[quote='george@georgespeller.com' pid='33014'
Just looking for a solution to my revoshift - the scale seems to have shifted - the first click is at "zero" and the highest is at 6. It won't go to 7 at all. Is this swimilar to the problem you had? If so I would like to knowe what you did, or find a reliable link to a manual online.
[/quote]
George

The cable needs adjustment.

Take a look at Alex's instructions in the "How to Adjust Your Rear Derailleur" link at the top of this page.
Nigel
  Reply
#7
OK - so far I've only fiddled with the adjuster but I'll take a spanner to it! Thanks for your help.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,407
05-01-2024, 10:31 AM
Last Post: Nutribun
 
2,770
01-27-2024, 08:38 AM
Last Post: Talha
 
8,624
12-08-2019, 08:18 AM
Last Post: CharleyFarley
 
9,163
02-24-2017, 12:45 PM
Last Post: Mountain
 
18,125
10-22-2014, 08:38 AM
Last Post: cny-man
 
18,141
03-19-2014, 11:02 AM
Last Post: nfmisso

Forum Jump:

[-]
10 Latest Posts
braking by reversing the pedals
Today 07:04 PM
Post-Ride Nutrition
Today 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Today 02:03 AM
Pre Ride Food Intake
Today 12:14 AM
SAVA Explorer 6061?
Yesterday 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM
(So California) PV Dr to be closed to bi...
03-31-2025 09:14 PM
Tubeless vs. tubes: What are the pros an...
03-31-2025 08:28 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
11 posts
no avatar 5. SPINMAN
8 posts