Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Threaded Inner tubes
#1
I purchased some inner tubes that are threaded all down the stem and have a nut. My question is do I need to use that nut and if so how tight do I need to adjust it.
  Reply
#2
Yes use it snug it up to the rim with light pressure.
Never Give Up!!!
  Reply
#3
Thanks George.
  Reply
#4
You also need something like this:
http://www.amazon.com/Panaracer-Schrader-Presta-Valve-Nut/dp/B001CJZ2M4/
is your rims are drilled for Schrader valves, and you have Presta valves. If you try to use a Presta valve tube in a rim drilled fro Schrader, and do not use something like this - the tube will blow when you inflate it.
Nigel
  Reply
#5
Hmmm....... good point Nigel, he might have bought the wrong Presta valves for his Schrader rim. See how they fit in rim hole, should be tight. If not to late exchange the tube. Unless it is correct than just screw the nut down.
Never Give Up!!!
  Reply
#6
or you can put a Presta Stem Savers like this:

http://wheelsmfg.com/presta-stem-savers.html
  Reply
#7
(07-22-2013, 01:13 PM)Texcards Wrote:  I purchased some inner tubes that are threaded all down the stem and have a nut. My question is do I need to use that nut and if so how tight do I need to adjust it.

Texcards,

where did you get a threaded inner tube? If it is a schrader valve tube (like the one on your car) I'd like to know where you got it because I've sort of been looking for threaded schrader tubes. The only place I can find them is by Schwalbe. But you probably have a Presta tube.

BTW, The STL Cardinal's rock!
  Reply
#8
(08-20-2013, 08:30 PM)garrett01 Wrote:  
(07-22-2013, 01:13 PM)Texcards Wrote:  I purchased some inner tubes that are threaded all down the stem and have a nut. My question is do I need to use that nut and if so how tight do I need to adjust it.

Texcards,

where did you get a threaded inner tube? If it is a schrader valve tube (like the one on your car) I'd like to know where you got it because I've sort of been looking for threaded schrader tubes. The only place I can find them is by Schwalbe. But you probably have a Presta tube.

BTW, The STL Cardinal's rock!

Sorry but it is a Presta.
Good to hear from another Cards fan.
Sorry but it is a Presta.
Good to hear from another Cards fan.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
New to the Forum - Introduction
Today 05:38 PM
Would you like a pizza after cycling?
Today 02:10 AM
Hardtail as only bike?
Yesterday 05:23 PM
Spoke Count Preference
Yesterday 09:17 AM
Pros & Cons of presta valve vs schrader ...
Yesterday 03:34 AM
Are you mainly into Mountain Biking, Roa...
Yesterday 02:20 AM
New around here
07-11-2026 10:53 AM
Favorite MTB brand?
07-10-2026 03:16 AM
29"front & 26" rear? Thoughts?
07-10-2026 03:13 AM
suspicious broken part after service--is...
07-09-2026 02:45 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
27 posts
no avatar 2. meamoantonio
17 posts
no avatar 3. GirishH
17 posts
no avatar 4. ReapThaWhirlwind
15 posts
no avatar 5. Mr. Beanz
13 posts