Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Getting what I want.
#21
I like the Raleigh Alley Way - with it's cro-mo frame and fork; much better than any aluminum framed bike, especially with suspension.
Nigel
  Reply
#22
I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...
  Reply
#23
(09-03-2013, 05:52 AM)Joe_W Wrote:  I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...

Belt drives work great on Harleys and for camshaft drives in automobile engines.....same manufacturer Gates
Nigel
  Reply
#24
This is my new "used" Raleigh Alley Way as it sits today. I'm going to add a padded seat of this same style and slightly larger pedals, these are good, just a bit small. It rides very smooth and quiet. 8 speeds are great for my limited riding. My Brother and I rode last night for just about 1.5 miles and we bath were winded , but Mike , my brother had just ran 4 miles and rested about 15 minutes before riding with me. I'm doing this to regain my strength and tune up my health. Wish me luck. I will post more photos and write more as I gain knowledge about this setup. Thank you all so very much.
John
(09-03-2013, 11:28 AM)nfmisso Wrote:  
(09-03-2013, 05:52 AM)Joe_W Wrote:  I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...

Belt drives work great on Harleys and for camshaft drives in automobile engines.....same manufacturer Gates

Nigel,
I never looked at the drive belt in that way but you are 100% correct ! I know there is one other style of belt drive with a Center Track (it's the name actually) and this link is to the company with a wealth of information on the subject. (http://www.carbondrivesystems.com/products/overview/ ). There is even an app to help you decide which type is right for you bike !
John
  Reply
#25
John;

If you are not going keep that premium saddle; please send it to me. Smile

If you are wise, you'll keep for when you dump the padded one in a couple of months.
Nigel
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Catastrophic bicycle failures
Yesterday 05:08 PM
Aipas m2
Yesterday 04:08 PM
trace - what used to take several apps a...
Yesterday 06:32 AM
Ride and Remember
10-13-2026 03:23 PM
Hello from Jasleen – getting more into c...
10-13-2026 08:48 AM
Fake accounts
10-13-2026 06:45 AM
Mountain Biking with or with out sunglas...
10-13-2026 06:35 AM
New rider
10-11-2026 02:57 PM
New to e-bikes in Pakistan — battery ran...
10-11-2026 05:55 AM
Need suntour derailleur replacement
10-10-2026 12:08 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
29 posts
no avatar 2. GirishH
25 posts
no avatar 3. Sidewinder
18 posts
no avatar 4. Jesper
17 posts
no avatar 5. SPINMAN
11 posts