Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Getting what I want.
#21
I like the Raleigh Alley Way - with it's cro-mo frame and fork; much better than any aluminum framed bike, especially with suspension.
Nigel
  Reply
#22
I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...
  Reply
#23
(09-03-2013, 05:52 AM)Joe_W Wrote:  I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...

Belt drives work great on Harleys and for camshaft drives in automobile engines.....same manufacturer Gates
Nigel
  Reply
#24
This is my new "used" Raleigh Alley Way as it sits today. I'm going to add a padded seat of this same style and slightly larger pedals, these are good, just a bit small. It rides very smooth and quiet. 8 speeds are great for my limited riding. My Brother and I rode last night for just about 1.5 miles and we bath were winded , but Mike , my brother had just ran 4 miles and rested about 15 minutes before riding with me. I'm doing this to regain my strength and tune up my health. Wish me luck. I will post more photos and write more as I gain knowledge about this setup. Thank you all so very much.
John
(09-03-2013, 11:28 AM)nfmisso Wrote:  
(09-03-2013, 05:52 AM)Joe_W Wrote:  I really like the VSF Fahrradmanufaktur tourers - classic lines, steel frames, no suspension (well, there are some, but I'd prefer without). I am sort of skeptic of the belt drives, so please share your experience with it! I'd very likely stay with dérailleur equipped bikes, though...

Belt drives work great on Harleys and for camshaft drives in automobile engines.....same manufacturer Gates

Nigel,
I never looked at the drive belt in that way but you are 100% correct ! I know there is one other style of belt drive with a Center Track (it's the name actually) and this link is to the company with a wealth of information on the subject. (http://www.carbondrivesystems.com/products/overview/ ). There is even an app to help you decide which type is right for you bike !
John
  Reply
#25
John;

If you are not going keep that premium saddle; please send it to me. Smile

If you are wise, you'll keep for when you dump the padded one in a couple of months.
Nigel
  Reply


Forum Jump:

[-]
10 Latest Posts
How many bikes do you have now?
Today 07:31 PM
Happy Holidays
Today 07:25 AM
What was your favourite bicycle?
Yesterday 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM
How often check or change mechanical dis...
12-20-2024 03:48 AM
Ketone Ester $$$
12-20-2024 01:54 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts