Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Cable guide bottom bracket.
#1
My cable guide on bottom bracket is a press on type and doesn't have a screw.
Looked around the 'net for a replacement but all of them have a screw.
This is for an older Black Diamond, "Ascent" model mountain bike that I just got and need to get in shape.
thanks
  Reply
#2
Get a cable guide with a screw.

Then you have two choices:
1. drill and tap a hole in you BB housing - remove the bottom bracket first, and stuff something in there to contain the metal shavings. A wad of duct tape sticky side out works well.

2. Use 3M VHB tape to secure it on the outside. Clean the surfaces to be bonded with isopropyl alcohol (pharmacy), let try, then apply the tape. After you have in place, heat it up with a hair dryer to fully cure the adhesive.
Nigel
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Giant reporting profits are 60% down
Today 12:21 AM
Thoughts on tariff effects on the cyclin...
Yesterday 11:06 AM
braking by reversing the pedals
Yesterday 10:15 AM
Post-Ride Nutrition
04-03-2025 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-03-2025 02:03 AM
Pre Ride Food Intake
04-03-2025 12:14 AM
SAVA Explorer 6061?
04-02-2025 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. Jake1
12 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. SPINMAN
8 posts