Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Trying to Identify Bottom Bracket Tool?
#1
Hi have a hybrid bicycle with Shimano gears. The rear casset takes a shimano fitting.
What I'm interested in is identifying the bottom bracket so I can buy the correct removal tool.

Please see the photo attached.
There are 4 groups of 4 notches running along the inside of the bracket bolt holding in the bearings.
From what I understand I need a shimano tool of some description but I could be wrong.
the Internal crank shaft is around 16mm thick and the diameter. The diameter of the inside of the outer ring I need the tool for is somewhere between 28mm and 33mm (It's difficult to measure).

Please see the photo.
Any help identifying this would be greatly appreciated.
Thanks

   
  Reply
#2
@Dominover

I would contact Park tools and forward your photo to them.

Link to their bottom bracket tool page:
https://www.parktool.com/en-us/category/crank-bottom-bracket
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Austin, TX Bike Lane Change
Yesterday 11:51 AM
Tubeless vs. tubes: What are the pros an...
Yesterday 06:41 AM
Do you have a four foot rule?
04-19-2025 02:21 PM
Let me introduce myself
04-19-2025 07:56 AM
Paris-Roubaix
04-18-2025 06:19 PM
What are the best cost effective ways to...
04-18-2025 01:34 PM
Climbing hills: Where have you found the...
04-18-2025 12:27 AM
Schrader vs Presta
04-17-2025 09:59 AM
New To The Forum
04-16-2025 11:50 PM
Good morning form Alberta CA
04-16-2025 08:16 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
17 posts
no avatar 2. Flowrider
15 posts
no avatar 3. SPINMAN
13 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. rydabent
9 posts