Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the January Giveaway for a Chance to Win the Movcan V80 E-bike Worth $889


Big gap between 2nd and 3rd cogs - is that normal?
#1
Hi,

I'd been having trouble shifting on my mountain bike and I took a look at the rear cassette. There's a gap between the 2nd and 3rd rings on the cassette. There 3rd cog is there, but it's snug up against the 4th cog. Not surprisingly, when I shift from 2nd to 3rd cog, it hangs up, then sort of half settles on that 3rd cog, then finally I have to shift again to get it up to the 4th cog. Is that normal, to have that big gap between the 2nd and 3rd cogs? I'm afraid I don't work on my bike enough to know if it was there when I bought the bike. I've attached a photo which shows it pretty clearly. You can see the 1st and 2nd cogs, then a gap, then the 3rd cog snug up against the 4th cog.

Any advice is appreciated. Thanks.
  Reply
#2
it appears someone has removed the cassette and stacked it incorrectly.flip the cog so all built in spacers face the hub. you did not wake one morning and your bike was like this. it was somewhere getting worked on and the cassette was removed and installed wrong.did you have a broken spoke replaced lately? you need a chain whip and cassette removal socket or take it back to the shop you failed to mention that serviced your bike last.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Yes, I had a spoke replaced! Do they really have to take the cassette apart to replace a spoke? If so, that's pretty shoddy, to put the cassette back together like that. I've worked on cassettes before, so maybe I can fix this one.

Thanks for the advice, by the way.
  Reply
#4
(07-06-2012, 11:19 AM)VenisonMogambi Wrote:  Yes, I had a spoke replaced! Do they really have to take the cassette apart to replace a spoke? If so, that's pretty shoddy, to put the cassette back together like that. I've worked on cassettes before, so maybe I can fix this one.

Thanks for the advice, by the way.

Just call me a bicycle forensic specialist , Smile I thought there may be more to the story.
It is quite common for the drive side spokes to fatigue first, and yes you have to remove the cassette to replace the spoke. simple fix if you have the correct tools. keep an eye out for it to happen again. if it does fairly soon you must replace or re lace the entire wheel as it will keep happening
rider safety and dependability negate this. Good luck, your welcome and welcome to biketutor
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
Yup, a spoke breaking on the drive side is usually caused by The Dreaded Chain Drop, when the chain falls off the large cog and is jammed between cassette and spokes. Those spoke protectors (the plastic discs you can still see on some lower end bikes) are butt-ugly but do indeed have a purpose! When taking off the cassette check for damaged spokes on the drive side. If there are any: replace. This might be a good opportunity to learn wheelbuilding: replace spokes one at a time and make the wheel nice and round again. Should not be too difficult assuming the wheel was more or less true from the beginning on.

Other reasons for spoke breakage are caused by bad build of the wheel: no proper stress relieving, tensioning or un-torsioning. Those also mean that more spokes are to follow.
  Reply
#6
(07-07-2012, 11:21 AM)Joe_W Wrote:  Yup, a spoke breaking on the drive side is usually caused by The Dreaded Chain Drop, when the chain falls off the large cog and is jammed between cassette and spokes. Those spoke protectors (the plastic discs you can still see on some lower end bikes) are butt-ugly but do indeed have a purpose! When taking off the cassette check for damaged spokes on the drive side. If there are any: replace. This might be a good opportunity to learn wheelbuilding: replace spokes one at a time and make the wheel nice and round again. Should not be too difficult assuming the wheel was more or less true from the beginning on.

Other reasons for spoke breakage are caused by bad build of the wheel: no proper stress relieving, tensioning or un-torsioning. Those also mean that more spokes are to follow.

Although I would like to say ,"nah that would not happen." I agree TOTALLY with the above. Many times things like this have happen from time to time and this is what makes us smarter. Wink.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
11,090
06-06-2020, 01:17 PM
Last Post: TheCrow
 
13,371
07-23-2011, 08:48 PM
Last Post: RobAR
 
6,022
01-24-2011, 12:30 AM
Last Post: DaveM
 
5,213
05-04-2010, 05:04 AM
Last Post: JonB

Forum Jump:

[-]
10 Latest Posts
Where do you put your phone when riding?
Yesterday 02:06 PM
Wishing you an Awesome 2025 & many fun r...
01-31-2025 05:55 AM
Fingers going numb especially last 2 on ...
01-30-2025 10:00 PM
New Travel Battery
01-30-2025 09:27 PM
Evglobal 24 volt bike
01-30-2025 01:08 AM
My 1981 COLNAGO "Super" possible early "...
01-29-2025 01:19 PM
The big difference in cyclist
01-29-2025 12:32 PM
How did your cycling start?
01-28-2025 06:58 PM
Beginner Mountain Biking Tips
01-28-2025 06:44 PM
Condor Acciaio, a premium steel road bik...
01-27-2025 01:49 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. SPINMAN
14 posts
no avatar 2. meamoantonio
13 posts
no avatar 3. Flowrider
12 posts
no avatar 4. enkei
12 posts
no avatar 5. ReapThaWhirlwind
11 posts