Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Big gap between 2nd and 3rd cogs - is that normal?
#1
Hi,

I'd been having trouble shifting on my mountain bike and I took a look at the rear cassette. There's a gap between the 2nd and 3rd rings on the cassette. There 3rd cog is there, but it's snug up against the 4th cog. Not surprisingly, when I shift from 2nd to 3rd cog, it hangs up, then sort of half settles on that 3rd cog, then finally I have to shift again to get it up to the 4th cog. Is that normal, to have that big gap between the 2nd and 3rd cogs? I'm afraid I don't work on my bike enough to know if it was there when I bought the bike. I've attached a photo which shows it pretty clearly. You can see the 1st and 2nd cogs, then a gap, then the 3rd cog snug up against the 4th cog.

Any advice is appreciated. Thanks.
  Reply
#2
it appears someone has removed the cassette and stacked it incorrectly.flip the cog so all built in spacers face the hub. you did not wake one morning and your bike was like this. it was somewhere getting worked on and the cassette was removed and installed wrong.did you have a broken spoke replaced lately? you need a chain whip and cassette removal socket or take it back to the shop you failed to mention that serviced your bike last.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Yes, I had a spoke replaced! Do they really have to take the cassette apart to replace a spoke? If so, that's pretty shoddy, to put the cassette back together like that. I've worked on cassettes before, so maybe I can fix this one.

Thanks for the advice, by the way.
  Reply
#4
(07-06-2012, 11:19 AM)VenisonMogambi Wrote:  Yes, I had a spoke replaced! Do they really have to take the cassette apart to replace a spoke? If so, that's pretty shoddy, to put the cassette back together like that. I've worked on cassettes before, so maybe I can fix this one.

Thanks for the advice, by the way.

Just call me a bicycle forensic specialist , Smile I thought there may be more to the story.
It is quite common for the drive side spokes to fatigue first, and yes you have to remove the cassette to replace the spoke. simple fix if you have the correct tools. keep an eye out for it to happen again. if it does fairly soon you must replace or re lace the entire wheel as it will keep happening
rider safety and dependability negate this. Good luck, your welcome and welcome to biketutor
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
Yup, a spoke breaking on the drive side is usually caused by The Dreaded Chain Drop, when the chain falls off the large cog and is jammed between cassette and spokes. Those spoke protectors (the plastic discs you can still see on some lower end bikes) are butt-ugly but do indeed have a purpose! When taking off the cassette check for damaged spokes on the drive side. If there are any: replace. This might be a good opportunity to learn wheelbuilding: replace spokes one at a time and make the wheel nice and round again. Should not be too difficult assuming the wheel was more or less true from the beginning on.

Other reasons for spoke breakage are caused by bad build of the wheel: no proper stress relieving, tensioning or un-torsioning. Those also mean that more spokes are to follow.
  Reply
#6
(07-07-2012, 11:21 AM)Joe_W Wrote:  Yup, a spoke breaking on the drive side is usually caused by The Dreaded Chain Drop, when the chain falls off the large cog and is jammed between cassette and spokes. Those spoke protectors (the plastic discs you can still see on some lower end bikes) are butt-ugly but do indeed have a purpose! When taking off the cassette check for damaged spokes on the drive side. If there are any: replace. This might be a good opportunity to learn wheelbuilding: replace spokes one at a time and make the wheel nice and round again. Should not be too difficult assuming the wheel was more or less true from the beginning on.

Other reasons for spoke breakage are caused by bad build of the wheel: no proper stress relieving, tensioning or un-torsioning. Those also mean that more spokes are to follow.

Although I would like to say ,"nah that would not happen." I agree TOTALLY with the above. Many times things like this have happen from time to time and this is what makes us smarter. Wink.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
10,863
06-06-2020, 01:17 PM
Last Post: TheCrow
 
13,229
07-23-2011, 08:48 PM
Last Post: RobAR
 
5,918
01-24-2011, 12:30 AM
Last Post: DaveM
 
5,111
05-04-2010, 05:04 AM
Last Post: JonB

Forum Jump:

[-]
10 Latest Posts
How many bikes do you have now?
Today 07:31 PM
Happy Holidays
Today 07:25 AM
What was your favourite bicycle?
Yesterday 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM
How often check or change mechanical dis...
12-20-2024 03:48 AM
Ketone Ester $$$
12-20-2024 01:54 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts