Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Bottom Bracket Size
#1
So, I'm relatively new to this. The bottom bracket shell (eccentric) on this bike....

http://bikepedia.com/QuickBike/BikeSpecs.aspx?Year=2007&Brand=Raleigh&Model=XXIX&Type=bike

....measures 65mm wide. I'm wanting to get a cartridge bb, but I don't know what size to get. 68mm? 73mm? Another all together? Much thanks.

J.R.
  Reply
#2
(09-11-2011, 02:17 AM)JRinTucson Wrote:  So, I'm relatively new to this. The bottom bracket shell (eccentric) on this bike....

http://bikepedia.com/QuickBike/BikeSpecs.aspx?Year=2007&Brand=Raleigh&Model=XXIX&Type=bike

....measures 65mm wide. I'm wanting to get a cartridge bb, but I don't know what size to get. 68mm? 73mm? Another all together? Much thanks.

J.R.

The easiest thing to do is to take your bike to a good bike shop and get them to measure BB and either they will fit it or sell you the right one. Without looking I would not know what threading it was or your chainwheel fitting. It might also need a thread chaser run through the threads to clean them up.
  Reply
#3
Hi JR. As there is no such thing as a 65 mm BB, your shell has probably already been chased and faced as ghost mentioned. That Raleigh takes a standard 24 TPI like Shimano makes. You will need a 68 mm x whatever over-all axle length you have.
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#4
(09-11-2011, 02:17 AM)JRinTucson Wrote:  So, I'm relatively new to this. The bottom bracket shell (eccentric) on this bike....

http://bikepedia.com/QuickBike/BikeSpecs.aspx?Year=2007&Brand=Raleigh&Model=XXIX&Type=bike

....measures 65mm wide. I'm wanting to get a cartridge bb, but I don't know what size to get. 68mm? 73mm? Another all together? Much thanks.

J.R.

I've found useful information here:

http://www.sheldonbrown.com/bbsize.html
  Reply
#5
(09-11-2011, 05:00 AM)ghost Wrote:  ...
take your bike to a good bike shop and...
You could answer any bike repair question that way. Of course the guy could go to a bike shop and pay them to do the job. But when someone asks a repair question, it's because they want to know how to do something.

`~- Nehmo
`~- Nehmo
  Reply
#6
never fitted one myself, but info here;
http://www.sram.com/truvativ/category/42
  Reply
#7
(11-18-2011, 11:24 AM)Nehmo Wrote:  
(09-11-2011, 05:00 AM)ghost Wrote:  ...
take your bike to a good bike shop and...
You could answer any bike repair question that way. Of course the guy could go to a bike shop and pay them to do the job. But when someone asks a repair question, it's because they want to know how to do something.

`~- Nehmo
The bike shop would know the width of the axle and other pertinent issues. Sorry if that is not what you wanted.
  Reply
#8
That did not come off very nice Nehomo,Mercy
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#9
(11-18-2011, 02:24 PM)painkiller Wrote:  That did not come off very nice Nehomo,Mercy
You are suggesting I should have been nicer. You don't say if you agree with me on the content of my post. And you don't address JR's question either. But I didn't say anything un-nice in itself, so, apparently, you like Ghost's position, in that JR should go to a bike shop instead of asking here.
As you can see, Ghost isn't backing down. He buttressed his argument by saying this (yet unknown) bike shop would know additional relevant information.
But what is a repair forum for if not to ask questions? And, although this is not the situation in this thread, often mechanics who work in bike shops are the ones asking the questions.
And I repeat: you could answer any question with the advice to ask elsewhere. That doesn't help the asking party a bit.
A 2007 Raleigh XXIX comes with a Truvativ gxp bb
http://www.5min.com/Video/How-to-Install-and-Overhaul-a-Truvativ-GXP-66770130
[Image: 2012-truvativ_gxp_bb-large-en.jpg]

113 mm spindle length
`~- Nehmo
  Reply
#10
You know what you can do for me NOHo.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Expensive bikes with crappy wheels
Today 10:15 AM
Santini fluted frame
Today 07:44 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts