Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for an Electric Commuter Bike from KBO Bike


Building a bike from scratch
#1
Hello everyone!

I'm new to the site, having just moved to Paris and one of my projects here is to re-build a frame that I've brought with me from Wales, but I've quickly realised I know nothing. So I'm hoping to get the advice I need here, if anyone is willing and patient to help me through it? Starting from the back, I'm currently confused about the V-Brakes. I've got some off an abandoned bike (there a few around so I'm looting what I can), but then I've bought a rear wheel (26") and the brake pads don't even come close to hitting the wheel rim. Does anyone know why this may be? Do brake arms perhaps come in different sizes?

Peace,
Jack
  Reply
#2
My first question would be is the frame for 26" wheels. are the brakes lower or higher? can you post some pics?
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Hi welcome to the site. Is the wheel for a road bike and the frame a Mountain bike?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#4
The brakes are higher, so I guess if it's not the brake arms then I just need a larger wheel? Also, it says it's a "leisure" wheel from b'Twin, but it's the same size as MTB Wheels, and my frame is a mountain frame.

I'll upload pictures soon as, just need a cable to connect camera. Thanks for the reply - I'll refund the wheel tomorrow and buy a camera cable.

Peace,
Jack
Pedal on
  Reply
#5
Hi Jack

V-brakes and Cantilevers fit the same pivots on the frame, and are designed for the pivots to be approximately 25mm below the brake surface on the rim. There is typically around 15mm of vertical adjustment for the pads around the nominal 25mm.

Measure the frame, and the wheels.

Wheels (and tires) have an ISO dimension call the bead seat diameter, which is approximately the braking surface center. 26" MTB are ISO 559 (559mm). 700c/29er MTB are ISO 622. The common 26 x 1 3/8 is ISO 590; 650c is ISO 571. (I ran into this on my Sierra Sport; which was I have determined was originally ISO590, now I have ISO571 on it; it originally had cantis, now has V brakes).

If you have a bare frame, you should start with the headset. Then you need to pay attention to the bottom bracket and crankset - they have to match. If you are going to use a front derailleur; that has to have travel range to match your bottom bracket/crankset combo.

Spend some time reading all of Sheldon Brown's stuff on bicycles. Have fun.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
12,879
01-02-2013, 03:09 AM
Last Post: Joe_W
 
13,471
07-27-2012, 11:35 PM
Last Post: Bill
 
6,640
06-25-2012, 03:56 AM
Last Post: trevgbb
 
19,494
07-22-2011, 10:07 PM
Last Post: benjrblant

Forum Jump:

[-]
10 Latest Posts
Hi
Today 10:17 AM
COLNAGO SUPER (unknown year)
Today 07:57 AM
Hallo..
Today 05:46 AM
Shifter Doesn't Have Clicking Sound
Today 12:01 AM
Looking for reliable bikes for gf and me...
Yesterday 09:03 PM
One expensive lock vs two cheaper locks?
Yesterday 10:41 AM
Sling Cycles Tagati
Yesterday 12:10 AM
What are your best biking places in your...
07-21-2021 02:30 PM
Bike won't shift gears at all, please he...
07-19-2021 07:51 AM
Crank Puller Failing to Pull Crank
07-19-2021 12:00 AM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
29 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. JR Namida
9 posts
no avatar 4. Criminal
6 posts
no avatar 5. Zviedrs
6 posts