Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Coverting the Nexus hub to "roller"
#1
Hello from the bluegrass state.
I’m contemplating an upgrade to my Shimano Nexus 8sp hub (SG-8C31) but unsure if there are components/ shops for this.
The internal hub has a coaster brake which is irritating to anyone preferring another brake system or the ability to back pedal for crank position.
Can this hub be converted to “roller brake” (I’m guessing a roller brake is a disc or V brake set up, allowing for back peddling).
I didn’t want to attempt a “shade tree mechanic” operation and simply remove the brake arm.
Is this a lost cause?
Thanks……Tom
2011softcruise


“Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.”
Airplane (1980) – Rex Kramer (Robert Stack)

  Reply
#2
Here are some useful links for you to understand what is inside:

http://www.sheldonbrown.com/nexus8/
http://bike.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0024-downloadFile.html/17)%20Inter%208%20ohaul.pdf
http://www.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50lparsys-0019-downloadFile.html/12)%20Structure%20and%20Function%203%20Speed.pdf
http://www.sheldonbrown.com/nexus-mech.html

Just disconnecting the brake arm is not going to disconnect the coaster brake, and will cause problems.

I would suggest switching to rim brakes, instead of trying to install the Rollerbrake®. The Rollerbrake® is kinda like a drum brake.
Nigel
  Reply
#3
Thanks Nigel, I'll see whats involved. I didn't understand the term "roller" and should have mentioned my interest in a disc brake set up instead.

The simpliest decision would be to sell my current 8 speed hub and invest in a hub thats already set up for a disc brake.

My current hub works fine so I have to decide whether to tolerate its function or put up the big bucks for what I want.

If there were parts to add to my hub and create the disc brake function then I would consider it but the SG-8C31 is engineered as-is.

Tom
2011softcruise


“Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.”
Airplane (1980) – Rex Kramer (Robert Stack)

  Reply
#4
Hi Tom;

http://bike.shimano.com/publish/content/global_cycle/en/us/index/products/0/alfine/product.-code-SG-S500.-type-.html

Or maybe a whole bike ready to go:
http://www.swobo.com/catalog/product_info_b.php?cPath=2448_2455
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
4,252
10-14-2019, 06:55 AM
Last Post: walter
 
29,869
10-10-2012, 05:50 PM
Last Post: SPANNER
 
7,276
06-29-2012, 12:25 AM
Last Post: AL_BUNDY
 
10,601
12-13-2011, 04:47 AM
Last Post: mr-asje
 
10,508
07-26-2011, 05:23 PM
Last Post: DaveM
 
13,210
05-17-2011, 05:33 PM
Last Post: hcjg1

Forum Jump:

[-]
10 Latest Posts
eBikes are banned in these places!
Today 10:54 AM
Best way to thoroughly clean a chain?
Yesterday 08:52 PM
Peugeot Nouveau Folder
Yesterday 05:24 PM
The great thing about trikes
Yesterday 12:11 PM
CALLING UK CYCLISTS! - Take Action to Fu...
02-19-2025 08:25 AM
Club Rides
02-17-2025 09:24 AM
Tubeless vs. tubes: What are the pros an...
02-16-2025 07:07 PM
What are the pros and cons of clip-on pe...
02-16-2025 06:55 PM
Where to travel on a bike Bucket List.
02-16-2025 10:33 AM
Cycling is Anti-Aging, But There's a Cat...
02-15-2025 10:50 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
17 posts
no avatar 2. meamoantonio
15 posts
no avatar 3. enkei
14 posts
no avatar 4. GirishH
12 posts
no avatar 5. rydabent
9 posts