Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Sram x9 wont change into higher gears
#1
Hello all

I am new to mountain biking and have a problem with my rear deraileur. It is a sram x9 and it will not change to the two smallest sprockets on the cassette. I have tried adjusting the h screw to no effect. How can i fix this please?

Thanks
  Reply
#2
If you look above there are links to videos on how to trouble shoot and also learn stuff Smile .
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Hi jab,

I had Exactly the same and today I found out why....
It's not a problem with maintainance.....

Do this to show yourself what is going wrong......

Shift to the highest gear, i.e make the rear mech cable totally slack. Screw out the "hi" screw far enough to make it have no effect on anything. Take your wheel out, get a flashlight and have a very close look at the hard to see side of the mech, where the "lo" screw comes to bear. By hand, move the mech inwards, to the low shift position. Look at the lo screw, you'll see that it touches one side of the inside of the parallelogram, and therefore, correctly, prevents overshifting. Now, let the mech come right out again, towards the high shift position. You'll see that bizarrely, that same screw touches again. Basically, the lo screw restricts both low and high shifting simultaneously acting as both high and low adjusters. So we'll never properly get that high gear unless we wind out the lo screw, in which case we'll run the risk of over shifting to low, with the chain jamming in the spokes. There is a way out of this, file away some of the mech inner edge, where the lo screw bears, when the mech tries to go to high. But, why should we, this is a design fault. only just discovered this today so I'm still working out what to do, contact sram etc..How on earth did they make something like this?.....

Hope this helps,

Dave.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,748
07-25-2021, 05:51 PM
Last Post: Pedroglobal
 
8,991
08-06-2015, 02:53 PM
Last Post: nfmisso
 
13,122
07-02-2014, 08:14 PM
Last Post: nfmisso
 
17,919
03-26-2014, 12:33 PM
Last Post: GeorgeET
 
6,893
03-13-2013, 12:46 PM
Last Post: RBurrelli

Forum Jump:

[-]
10 Latest Posts
Tour of Luzon 70 years of Filipino Cycli...
Today 01:22 AM
What are the best cost effective ways to...
Today 01:19 AM
RECOMMENDATION
Today 01:04 AM
Injury Recovery
Yesterday 07:33 PM
Good morning form Alberta CA
Yesterday 09:40 AM
Unlocking speed on my e-bike.
04-27-2025 01:04 PM
MTB handlebar width
04-27-2025 06:25 AM
What is your favorite MTB trail/route in...
04-27-2025 06:16 AM
Bridgestone Blouson bike.
04-26-2025 07:57 PM
Thoughts on paceline riding
04-26-2025 05:51 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. enkei
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. Flowrider
15 posts
no avatar 5. Painkiller
11 posts