New: Take part in the March 2020 Giveaway for an ELEVEN Cycling Uniform

Welcome guest! Register or sign in to participate in the cycling discussions.

Shifter wont click
I have a 2012 Sram Red Groupset. I was replacing the cable for the front derailleur yesterday and i must have done something because now its fucked. Now when I put the cable in and attach it to the front derailleur it will not click into the correct position. The front derailleur will still move up onto the larger ring but after I take my finger off the lever it goes back into the smaller ring. Does anybody have any experience with this? what happened? adn how do I fix this?

A couple of possibilities: cable is not properly routed at the FD, the cable length is a fraction to short. There are probably other possibilities, pictures would help.

Possibly Related Threads...
Thread Author Replies Views Last Post
  Headset wont tighten Tridox 5 7,081 07-03-2014, 12:14 AM
Last Post: nfmisso
  Chain cutting wont work Dan 2 3,676 03-13-2013, 04:46 PM
Last Post: RBurrelli
  Pedals wont turn, back wheel wont rotate backwards mittenumleben 5 7,582 12-30-2012, 03:27 AM
Last Post: FredS
  Chain wont stay in Gear 1 Patricmurphy 1 4,429 09-25-2012, 02:00 PM
Last Post: Bill
  Pedals turn freely but wont engage anything. tagrant25 2 11,360 08-27-2012, 05:14 AM
Last Post: GeorgeET
  Strange click every 10-20 seconds car5car 2 3,983 02-26-2012, 01:18 AM
Last Post: nfmisso
  Sram x9 wont change into higher gears jab 2 11,203 08-16-2011, 08:54 PM
Last Post: davembk
  Bent derailleur hanger tool wont fit AlexM 5 11,574 05-22-2011, 12:34 AM
Last Post: AlexM
  Rear Derailleur wont shift SteveHammersley 2 7,373 09-06-2010, 02:18 PM
Last Post: cyclerUK
  Click while climbing ejward13 5 6,320 04-23-2010, 06:58 AM
Last Post: Joe_W

Forum Jump: