Mech disc brakes

[royzart]

Hi...cant seem to remove right hand pad on my front disc brake. left one drops out ok. any ideas folks... thank you

[nameused]

I'm not sure what kind of disc brake you have, but on the bike that I have with a front disc brake, you can unscrew the right side of the caliper with a hex wrench and pull the right pad out that way due to the pad being too big to fit through the slot.

[RobAR]

Which Make/Model of caliper are you using, royz?

[trevgbb]

Sometimes held in with a magnet, but most brake mfg's have their own websites with setting up info and diagrams.

[royzart]

Thank you for that...will try it

---

promax disc brakes on the bike at the moment
need some hayes/avid type i reckon......

---

(04-05-2011, 05:10 PM)nameused Wrote:  I'm not sure what kind of disc brake you have, but on the bike that I have with a front disc brake, you can unscrew the right side of the caliper with a hex wrench and pull the right pad out that way due to the pad being too big to fit through the slot.

[royzart]

(04-05-2011, 09:25 PM)RobAR Wrote:  Which Make/Model of caliper are you using, royz?

promax disc brakes,they dont feel as though they
are man enough for my fs20 diamondback,its quite heavy

[nameused]

(04-06-2011, 05:34 PM)royzart Wrote:  

(04-05-2011, 09:25 PM)RobAR Wrote:  Which Make/Model of caliper are you using, royz?

promax disc brakes,they dont feel as though they
are man enough for my fs20 diamondback,its quite heavy

If I remember right mine is a promax (entry-level), so what I did might work for you.