11-09-2010, 12:25 PM
Hello Everyone - ( This is my first offical post , so I hope Im not breaking any rules )
Any way, as the Thread title suggests, I am looking for ways I can modify existing cutting methods so I can hopefully use one of those - more affordable Dremel Rotary Tools for cutting a frame ( not a bike frame ) but actually a mobility device I plan on trying to add a motor too .
The problem is Im not very good with vibrations in general ( even with electric toothbrushes ) as they tend to affect my very sensitve / weak joints and muscoskeletal tissue in general , so I was wondering if there was any way round this.
What I was hoping to do then was seeing if there was a way I could clamp one of these tools in so it was stable but still able to rotate so all i would have to do is turn it while the rotary tool was held in place.
As the item I need to cut is too large to move round that blade ( more akward than heavy given theres no way to disassemble it ) I was also hoping there might be a way I could also move the clamps to rotate horizontally i.e. as well as vertically.
Im not sure how easy this would be using a clamp system , or even if there are better methods that would allow me to do something like this, as my knowldege of clamps boils down to vice ones and thats almost it.
The mobility device in question , which I have linked too below , is not so heavy , but defiently too large for me to hold as you will see from pic below.
knee crusier
I dont know any one else who could help with this , and TBH , would rather like the freedoom of doing it myself if I could , so If any one has any suggestions or setups I could use to cut this using a dremel ( assuming dremel can ) I really any suggestions you have.
Thanks for reading this![Smile Smile](https://forums.bikeride.com/images/smilies/smile.png)
Melon
Any way, as the Thread title suggests, I am looking for ways I can modify existing cutting methods so I can hopefully use one of those - more affordable Dremel Rotary Tools for cutting a frame ( not a bike frame ) but actually a mobility device I plan on trying to add a motor too .
The problem is Im not very good with vibrations in general ( even with electric toothbrushes ) as they tend to affect my very sensitve / weak joints and muscoskeletal tissue in general , so I was wondering if there was any way round this.
What I was hoping to do then was seeing if there was a way I could clamp one of these tools in so it was stable but still able to rotate so all i would have to do is turn it while the rotary tool was held in place.
As the item I need to cut is too large to move round that blade ( more akward than heavy given theres no way to disassemble it ) I was also hoping there might be a way I could also move the clamps to rotate horizontally i.e. as well as vertically.
Im not sure how easy this would be using a clamp system , or even if there are better methods that would allow me to do something like this, as my knowldege of clamps boils down to vice ones and thats almost it.
The mobility device in question , which I have linked too below , is not so heavy , but defiently too large for me to hold as you will see from pic below.
knee crusier
I dont know any one else who could help with this , and TBH , would rather like the freedoom of doing it myself if I could , so If any one has any suggestions or setups I could use to cut this using a dremel ( assuming dremel can ) I really any suggestions you have.
Thanks for reading this
![Smile Smile](https://forums.bikeride.com/images/smilies/smile.png)
Melon