Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Coaster brakes
#1
I just rebuilt the rear wheel hub with coaster brakes. Everything seems Ok, but there seems to be some unnecessary drag, or friction interfearing with the wheel spinning. Any suggestions?
  Reply
#2
Parker tools site has some good info on coaster brakes.

If you are getting drag, first make sure the wheel is not rubbing anything, than you may have tightened the bearings too much, if they were smooth and properly greased on reassembly.
Never Give Up!!!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Hatch Chiles Rule!
11-13-2026 06:18 PM
Are you mainly into Mountain Biking, Roa...
11-11-2026 11:08 AM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
How Bad Are E-bikes By You?
11-08-2026 10:29 PM
Shortness of breath.
11-08-2026 09:56 PM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM
Chain skips under heavy load when pedall...
11-06-2026 02:44 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
19 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. meamoantonio
11 posts
no avatar 4. GirishH
8 posts
no avatar 5. Clark
6 posts