Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Crown Race Grease
#1
I'm building up a new frame, but since it's the first time I'm trying, I've had my LBS handle the headset and BB install. I also had them install the crown race on the fork but I noticed that the mechanic didn't grease the crown race seat on the fork, which the instructs that came with the fork say should be done.

Is this critical? I'll grease the top of the race, which seems more important to me as it is in direct contact with the headset. I'd hate to have to take the fork back to have the race greased and reseated, but I don't want to skip any corners now that are going to haunt me later. Not sure if this matters, but it's an all carbon fork.

Thanks,

Andrew
  Reply
#2
All bearings should be greased. Not sure of what you got. MORE INFO.

CALL your LBS and ask . Could be sealed parts as probably in your BB too.


Suggest you look at Alex's videos.


http://bikeride.com/adjust-threadless-headset/

http://bikeride.com/overhaul-threaded-headset/
Never Give Up!!!
  Reply
#3
I wouldn't bother to take it off and reseat it. It's not usually that critical. BTW. you say you "noticed" that they didn't grease it. If they wiped off any excess you wouldn't be able to see the grease. So you might be making a wrong assumption anyway.
  Reply
#4
Thanks, George, but no bearings involved here - just the crown of the fork and the fork crown race. (I know the top of the race should be greased because it does work with the lower headset bearings, but this is the bottom of the race we're talking about.)

And thanks to you, too, Dave. I actually watched him seat it, so I know he didn't use any grease. Not sure why that stuck with me, but I guess if I had thought about it I would have asked while he was doing it. Anyway, glad to hear it's not critical.
  Reply
#5
Yes I thought you confusing info thats why I suggested checking Alex's video to clear up terminology. I could think of no reason why the crown race should have grease between it and the fork top, its a pressed fit and does not move. The bearing surface is on top of the race (as you say) and that gets the bearings and grease is needed there as it gets sandwiched between the lower race and the head and of course on top head bearing needs grease too...
Never Give Up!!!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
1,170
10-22-2024, 09:38 AM
Last Post: rydabent
 
3,869
02-07-2022, 02:46 PM
Last Post: Jesper
 
8,636
06-09-2014, 02:23 PM
Last Post: !TREK4ME!
 
13,706
06-25-2013, 02:25 PM
Last Post: bphodges
 
30,069
10-10-2012, 05:50 PM
Last Post: SPANNER
 
13,250
06-28-2012, 02:28 AM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
Injury Recovery
Today 01:22 PM
Energy gels for cycling
Today 01:14 PM
What must-know bike care tips are we ove...
Today 01:06 PM
eBikes are banned in these places!
Today 12:59 PM
Cycling outbreak in New York City
Today 09:37 AM
Off-season hill climbing training tip
Yesterday 03:01 AM
Florida Spiders (Warning: not suitable f...
Yesterday 02:58 AM
Who are you Feeling Today?
Yesterday 02:57 AM
need e-trike advice (wife knee surgery)
Yesterday 02:55 AM
Removing and refitting rear wheel on bel...
03-13-2025 09:03 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. rydabent
13 posts
no avatar 2. GirishH
12 posts
no avatar 3. enkei
12 posts
no avatar 4. SPINMAN
9 posts
no avatar 5. Jake1
8 posts