Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Please help on adjusting these V-brakes!
#1
I cannot get these things right. I already watched the video tutorial but it didn't help me any. I managed to adjust the set for the front wheel ok, but the bake ones do want to corporate.

I keep re-adjusting the cable tension, cable position, brake screw etc but cannot get it right. One arm moves good but the other arm is too close to the wheel. So when I pull the brake level one arm moves and the other doesn't, well doesn't move very much. How do you adjust these? I watched someone else's tutorial and they said to unscrew the barrel screw almost all the way, pull the cable tight, then screw the barrel screw back in. Didn't work.

Anyone else have this problem of uneven V-brakes? the arm's both have good spring-back though when I un-hooked them. I'm going biking on Sunday and I hope to have these fixed by then.
  Reply
#2
Fairly common problem but everything you need to know is in the video except!!
check that your wheel is central in the frame, it is not unusual, especially at the lower end of the market. to have wheels either not aligned properly or not dished correctly.
  Reply
#3
Most v-brakes have a spring tension adjustment on one or both of the individual arms. This is how you "center" them so that they both pull away from the rim evenly. Usually it is a small screw down near the bottom of the arm where it pivots.
  Reply
#4
(05-28-2010, 04:45 PM)DaveM Wrote:  Most v-brakes have a spring tension adjustment on one or both of the individual arms. This is how you "center" them so that they both pull away from the rim evenly. Usually it is a small screw down near the bottom of the arm where it pivots.

Thanks! I didn't even notice them.

By the way, while I was messing around with this I accidentally popped off the "cap" on the end of the brake wire. Can I buy these online anywhere? I don't want to become really frayed over time.
  Reply
#5
There called cable tips, should be able to get them anywhere. Some people use a drop of super glue instead.
  Reply
#6
(05-28-2010, 08:17 PM)DaveM Wrote:  There called cable tips, should be able to get them anywhere. Some people use a drop of super glue instead.

Do you think they'd charge me if I asked for one at my LBS?
  Reply
#7
Probably not. They're like 2 cents (well, maybe 5) anyway...
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
How many bikes do you have now?
Today 11:19 AM
Speed limiter adjustment
Today 08:02 AM
Unlocking speed on my e-bike.
Today 07:58 AM
Happy Holidays
Yesterday 07:25 AM
What was your favourite bicycle?
12-21-2024 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts