New front derailleur needed for a compact crank?

marathon marke · 04-26-2010, 12:27 AM

I just ordered a compact crank, 50x34, changing from the 53x39 I presently have. My rear cassette is a 11-23. My front derailleur is a Shimano Ultegra 6600. Does anyone know if the front derailleur will handle that okay?

cyclerUK · 04-26-2010, 05:45 AM

I would say just try it.
You may have to lower it a fraction?

The 6600 has a "capacity" of 16 teeth so in theory 50-16 = 34 so should be fine.

trevgbb · 04-26-2010, 02:42 PM

Have a look on Shimano's web site, should find this info under tech support or service centre.

10 Latest Posts
Christmas presents for cycling Yesterday 10:23 PM
Lectric One 04-17-2024 09:58 PM
Cycling in the Wind 04-17-2024 03:45 PM
Do you have a four foot rule? 04-17-2024 12:49 PM
What New Year's Cycling Resolutions Do Y... 04-17-2024 10:58 AM
E-Bike with my camera 04-16-2024 09:47 PM
Tyres keep popping off wheels... 04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set 04-16-2024 03:26 PM
Rear hub issue 04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea... 04-16-2024 12:43 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom