Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Cantilevers to v-brake cable?
#1
Hi There, first of all id like to thank the maker of this site! the videos are great and easy to learn from.

I have a 15 year old bike, which i have stripped and replaced most parts from a new bike (because i needed a bike frame without back suspension for my rear baby seat)

The back brakes never were any good on the Cantilever, in fact they hardly worked. so i have taken the V brake system from my newer bike, which is now in bits.. (it was a cheap crappy new bike)

I have set the v brake system up, but the black cable looks out of place and wont sit in its housing if i set the v brakes up right.. it doesn't seem to work. what do i do?

[attachment=882]
[attachment=883]
  Reply
#2
Hopefully I am reading this properly (just woke up and on my 1st cup of coffee). Here is a post with similar question..
http://forums.bikeride.com/thread-1433.html
if this does not answer please let us know

Bill
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Yea I read that, but I don't think my cables are right?? Can you see by the pic if it's alright, or shall I shorten the black cable?
  Reply
#4
The "V" arms should be more vertical.
The right arm is going to rub on the tire when pulled on.
I can't see the pads in the photo,s but, if you can, move them nearer the rims.
Slacken the cable or unclip the cable.
Adjust the pads so that the arms move outwards then re-attach the cable.
This can be done by swapping spacers from back to the front of the mounting stud of the pads
Or, if a smooth stud. then slide the pad nearer the rim.
Hope the above is not to confusing?

P.S. Yes the outer is a bit long but get the arms correct first.
Ride hard or ride home alone!
  Reply
#5
Sorry newby here, I'll try and get the arms vertical, shouldn't the black cable be sitting in that hole where it was before? Or is it ok running free?
  Reply
#6
(05-16-2010, 03:05 PM)leon_in_uk Wrote:  Sorry newby here, I'll try and get the arms vertical, shouldn't the black cable be sitting in that hole where it was before? Or is it ok running free?

The hole is for a cable that goes to the original "cantilever" brakes.
The cable to "V" brakes runs free.

Some info here:-
http://www.sheldonbrown.com/canti-direct.html
Ride hard or ride home alone!
  Reply
#7
Thanks mate, I'll try shortening the black tube, and adding bolts to the right brake pad, see if that works, thanks
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
14,585
07-22-2015, 06:43 PM
Last Post: knl
 
12,127
07-11-2015, 10:28 PM
Last Post: nfmisso
 
18,924
06-05-2012, 05:13 AM
Last Post: trevgbb
 
17,535
07-31-2011, 07:54 PM
Last Post: nextmatt
 
23,750
04-27-2011, 06:12 PM
Last Post: Painkiller

Forum Jump:

[-]
10 Latest Posts
Your next ebike could have two motors, b...
Today 07:09 PM
How Bad Are E-bikes By You?
Today 07:01 PM
Shortness of breath.
Today 06:56 PM
Are you mainly into Mountain Biking, Roa...
Today 06:54 PM
Hatch Chiles Rule!
Today 05:29 PM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
22 posts
no avatar 2. meamoantonio
11 posts
no avatar 3. ReapThaWhirlwind
11 posts
no avatar 4. Sidewinder
8 posts
no avatar 5. GirishH
8 posts