08-26-2012, 08:05 PM
As I stated above these are not meant for servicing, but rather throw away and replace 
. Sorry I know this is not what you wanted to hear, but it is the truth. The price of these are rather minimal or if you like find a similar one by counting the number of cogs and each cogs teeth take it off a used wheel, providing the freewheel is in decent shape and use that until you find a new one.
AGAIN TO ANYONE THAT TRIES TO SERVICE A FREEWHEEL IT CAN NOT BE DONE! Sorry about the caps but it gets attention.
[/quote]
Thanks to ALL! but I just contact with an expert that do this in an easy way!
Here the link:
http://www.bikeforums.net/showthread.php/707342-Build-a-long-freewheel!!!!-Photo-heavy?highlight=freewheel+rebuild
Regards, Max
. Sorry I know this is not what you wanted to hear, but it is the truth. The price of these are rather minimal or if you like find a similar one by counting the number of cogs and each cogs teeth take it off a used wheel, providing the freewheel is in decent shape and use that until you find a new one. AGAIN TO ANYONE THAT TRIES TO SERVICE A FREEWHEEL IT CAN NOT BE DONE! Sorry about the caps but it gets attention.
[/quote]
Thanks to ALL! but I just contact with an expert that do this in an easy way!
Here the link:
http://www.bikeforums.net/showthread.php/707342-Build-a-long-freewheel!!!!-Photo-heavy?highlight=freewheel+rebuild
Regards, Max
![[-]](https://forums.bikeride.com/images/flatty/collapse.png "[-]")
