Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Tool kit for replacing wheel bearings
#1
I would like to replace the front wheel bearings. What tool would I require and where can I find them cheap?
  Reply
#2
(07-02-2010, 10:49 PM)zabir Wrote:  I would like to replace the front wheel bearings. What tool would I require and where can I find them cheap?

Hi zabir,
We need a little more information to provide you with the answers of which you seek. For instance what kind of bike do you have, what size is is the wheel? Maybe a picture if you can upload it. As far as the proper tools we need just a little more information.


Bill
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
You will need a thin flat cone spanner for the cone nuts. The outside locknut can adjusted/undone with a normal spanner:-
http://www.sheldonbrown.com/gloss_an-z.html#axleset

and:-
http://www.parktool.com/repair/readhowto.asp?id=105

There are different size spanners so check out your LBS for one.
Ride hard or ride home alone!
  Reply
#4
You will also need tweezers to pick the bearing balls out of the bearing and to put them in again.

(+ rags, degreaser and grease and I usually replace the balls with new ones as it is a hassle to get them really clean and they cost close to nothing)
  Reply
#5
As for where to find them you can shop online or go to Local Bike Shop. Best online place well there are a couple, like http://www.amazon.com , http://www.ebay.com , or a website in your country that deals with bicycle parts and tools.

To add tweezers are great idea for picking out the bearings but a pen type magnet can be used too (although not as precise as tweezers). Grade 25 chrome steel is the best but you can get away with Grade 100. Difference in those is the hardness.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
Never used tweezers or a magnet but good ideas.

Undo one side and withdraw axle.
Unless the cones are pitted / worn then leave one cone/locknut side on. (don't move it)

Clean out hub, cups, balls and both cones.

Re-assembly:-

a) Some hubs have a dust caps so:-
Make sure you have equal number of balls.
Grease one cup and push axle in from other side only far enough to stop balls from falling into hub center.
Fit 1/2 the balls in the cup.
The grease will hold the balls in place.
Drop axle out and re-insert into side with balls in.
Turn wheel over and do the same to the second cup / balls.
Push axle completely in.
Now re-fit second cone etc' and adjust.

b) If the hub doesn't have dust caps (old style).
Then the balls can be fitted with the axle in place most of the way.
Grease both cups.
Put axle in with the fixed cone up but leave a gap to drop balls in.
Once balls are in push axle completely in so that the balls are held.
Turn wheel over, holding axle so it doesn't drop out.
Screw on loose cone leaving a gap for remaining balls.
Fit balls and then secure cone, locknut etc.
Adjust.
Ride hard or ride home alone!
  Reply
#7
Nice instructions cycler Smile
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,973
02-07-2022, 02:46 PM
Last Post: Jesper
 
3,998
08-30-2021, 03:46 AM
Last Post: Poissonj1
 
21,423
05-26-2015, 02:31 PM
Last Post: eric1023
 
49,111
01-13-2015, 12:13 PM
Last Post: joseph wolf man
 
20,725
09-16-2014, 01:39 PM
Last Post: GeorgeET
 
8,183
12-25-2013, 07:11 AM
Last Post: SchwinnMonkey

Forum Jump:

[-]
10 Latest Posts
Pre Ride Food Intake
Today 02:43 AM
Post-Ride Nutrition
Today 02:40 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Yesterday 06:15 PM
Zwift v Spin v Wahoo
Yesterday 05:59 PM
Have you Ever Tried an Electric Bike?
Yesterday 05:07 PM
SAVA Explorer 6061?
Yesterday 03:31 PM
Good Morning from SW Ohio
Yesterday 07:32 AM
(So California) PV Dr to be closed to bi...
03-31-2025 09:14 PM
Tubeless vs. tubes: What are the pros an...
03-31-2025 08:28 AM
The great thing about trikes
03-31-2025 08:16 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
19 posts
no avatar 2. Flowrider
19 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. Jake1
10 posts
no avatar 5. enkei
9 posts