Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Trek domane tyre
#1
Hi

I have a trek domane 2.3, and I have changed the rear tyre to 28 (it was 25 originally)

The tyre rubs with the brake arm (v brake), I fear it doesn’t seem to be compatible

Is there any way to adjust the position of the brake arm? I just need it to ne around 2mm higher

Thanks
  Reply
#2
(11-08-2024, 02:24 AM)Jekpoint Wrote:  Hi

I have a trek domane 2.3, and I have changed the rear tyre to 28 (it was 25 originally)

The tyre rubs with the brake arm (v brake), I fear it doesn’t seem to be compatible

Is there any way to adjust the position of the brake arm? I just need it to ne around 2mm higher

Thanks
pics would be nice, did not know they had v-brakes, i was thinking it had calipers. very few road bikes today can handle a 28c tire.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Agree with what Painkiller stated (but nothing that the "reap" fool says). I do not know if your bike has vertical or horizontal drop-outs (I assume vertical or thru-axle); but on my bikes I can adjust the rear hub position to allow for tires that are not necessarily meant to be installed on some of my frames to avoid tire contact with the brakes. I think 28mm is pushing it but if the frame can handle that size then go for it. I thought those models (at least early models) had caliper brakes so I will admit to not knowing your bike's configuration. What year is your model?
  Reply
#4
Bikes in yesteryear could rarely fit a 28c tire. The pro scene has begun adopting larger tires recently for the comfort and safety of them. Sizes like 28c has become a standard and 32c behind it even. With that, modern bike components have also began to adapt for larger tires. Shimano would normally only fit 25c at most, but now 28c is a standard for Shimano calipers.

As for your v-brakes, there's a nut that locks the brake pad into place. See if you can loosen that nut and then shimmy the pad down flush with the rim and refasten the brake pad.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,035
03-24-2024, 05:48 PM
Last Post: Frankly
 
7,215
02-09-2022, 02:01 AM
Last Post: Jesper
 
11,148
06-07-2015, 03:57 PM
Last Post: Painkiller
 
17,333
03-30-2015, 12:18 PM
Last Post: nfmisso
 
9,999
04-02-2014, 05:31 PM
Last Post: Snowpup
 
10,111
04-02-2014, 04:01 AM
Last Post: kevino47
 
14,462
02-04-2013, 08:59 AM
Last Post: andy2307
 
12,036
08-11-2011, 12:43 PM
Last Post: DaveM

Forum Jump:

[-]
10 Latest Posts
(So California) PV Dr to be closed to bi...
Yesterday 09:14 PM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
Yesterday 08:34 AM
Good Morning from SW Ohio
Yesterday 08:33 AM
Tubeless vs. tubes: What are the pros an...
Yesterday 08:28 AM
The great thing about trikes
Yesterday 08:16 AM
Injury Recovery
Yesterday 08:06 AM
Fellow cyclists, we need your help! Plea...
Yesterday 08:01 AM
New member old rider
Yesterday 07:54 AM
Post-Ride Nutrition
Yesterday 07:52 AM
Pre Ride Food Intake
Yesterday 05:53 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
19 posts
no avatar 2. Flowrider
17 posts
no avatar 3. meamoantonio
12 posts
no avatar 4. enkei
9 posts
no avatar 5. Jake1
9 posts