Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Chain rides up on sprocket teeth
#1
I removed and replaced the cassette on my bike (making no changes).  Now I find that when the wheel is under load the chain climbs up on the teeth of the smallest sprocket (see photo).[Image: dpy7uc.jpg]
Everything works fine with the other gears or when the wheel spins freely.  This seems to be the *opposite* effect I'd expect if the chain had stretched or the gear teeth were worn.  Instead, the pitch of the chain seems too short, not too long.  Can anyone explain what's happening and how I can fix it?
  Reply
#2
something does not look right about the high gear on that cluster. I would mention it is best to replace the chain and cluster at the same time. but your problem is typical of a worn chain or cluster or both.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Please post some more pictures, at least one from a bit further back.

To me, it MAY be that the chain is too long for the RD to completely take up; it looks like you have the chain on the smallest chainring in addition to the smallest cog at the back - not recommended.
Nigel
  Reply
#4
Thanks for your suggestions.  I check the chain and it is not worn; also, the problem occurs with the chainwheel in either gear.  I've done some more investigation in the meantime and have concluded that the sprocket is indeed worn.  In case it helps anyone else, I found the Sheldon Brown article on "Chain and Sprocket Wear" quite helpful, as always.  With the wheel off the bike, I draped the chain over the smallest sprocket and pulled downward on the right side of the chain.  When I flipped the first engaged chain link on the left free of its tooth with my finger, the chain jumped forward just slightly.  This means the first tooth was doing all the holding, which, as Sheldon Brown says, is symptomatic of a worn sprocket.  Time to replace the cassette, I'm afraid.
  Reply
#5
Fortunately, cassettes are inexpensive, and you now have an opportunity try a different one.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,096
06-03-2022, 08:08 PM
Last Post: Zomb13k113r
 
5,734
05-10-2020, 10:03 AM
Last Post: CharleyFarley
 
5,544
07-21-2014, 08:20 AM
Last Post: cny-man
 
17,185
04-10-2014, 06:41 PM
Last Post: dancer
 
14,011
02-14-2014, 06:56 PM
Last Post: Dave54
 
12,525
01-19-2014, 07:48 PM
Last Post: 1FJEF
 
18,044
04-03-2013, 12:38 AM
Last Post: DaveM

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Yesterday 07:43 AM
Second wheelset for ebike.
Yesterday 01:41 AM
Tire Sizing (Or How to Buy A Tire)
11-21-2024 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
11-21-2024 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
21 posts
no avatar 2. GirishH
14 posts
no avatar 3. enkei
14 posts
no avatar 4. ReapThaWhirlwind
11 posts
no avatar 5. Flowrider
11 posts