Cross thread

Forrest1995 · 08-11-2013, 10:07 AM

Hi, just bought a road bike second hand and needed to change the pedals as I don't have the clip in shoes. I can't for the life of get the right Hand pedal out assume the threads have crossed. S tbeasy to resolve I assume a bike shop can drill out but worried it will damage the existing threads.

DaveM · 08-11-2013, 02:13 PM

You may be turning it the wrong way. Note that the pedal on the left side has reverse threads and the right pedal has normal threads. So they unscrew in opposite directions.

Beyond that, it's not too uncommon for pedals to get a little stuck. Some rust breaker on the threads may help. But you may just need some more leverage (breaker bar). But make sure y're going the right direction of course.

1FJEF · 08-11-2013, 08:22 PM

(08-11-2013, 10:07 AM)Forrest1995 Wrote: I can't for the life of get the right Hand pedal out

Yeah, what he said, pretend you are tightening it. Also, when you put the new pedals on, grease the threads a bit so they will come off with little effort in the future.

10 Latest Posts
Are you mainly into Mountain Biking, Roa... Yesterday 11:08 AM
Are 26" really dying out? Yesterday 11:02 AM
Wanted \| Magura Louse or Julie rear Yesterday 04:03 AM
Hatch Chiles Rule! 11-09-2026 04:56 PM
Should eBikers have to get an eBike lice... 11-09-2026 05:21 AM
How Bad Are E-bikes By You? 11-08-2026 10:29 PM
Shortness of breath. 11-08-2026 09:56 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom