Cross thread

Forrest1995 · 08-11-2013, 10:07 AM

Hi, just bought a road bike second hand and needed to change the pedals as I don't have the clip in shoes. I can't for the life of get the right Hand pedal out assume the threads have crossed. S tbeasy to resolve I assume a bike shop can drill out but worried it will damage the existing threads.

DaveM · 08-11-2013, 02:13 PM

You may be turning it the wrong way. Note that the pedal on the left side has reverse threads and the right pedal has normal threads. So they unscrew in opposite directions.

Beyond that, it's not too uncommon for pedals to get a little stuck. Some rust breaker on the threads may help. But you may just need some more leverage (breaker bar). But make sure y're going the right direction of course.

1FJEF · 08-11-2013, 08:22 PM

(08-11-2013, 10:07 AM)Forrest1995 Wrote: I can't for the life of get the right Hand pedal out

Yeah, what he said, pretend you are tightening it. Also, when you put the new pedals on, grease the threads a bit so they will come off with little effort in the future.

10 Latest Posts
New rider 10-02-2026 11:27 PM
Mountain Biking with or with out sunglas... 10-02-2026 11:23 PM
How Bad Are E-bikes By You? 10-02-2026 11:12 PM
Catastrophic bicycle failures 10-02-2026 11:08 PM
2007 Trek Pilot S.P.A. 5.2 10-02-2026 05:40 PM
I don't usually wear a bike helmet. Does... 10-02-2026 03:51 PM
Impromptu bikepacking/touring dilemma.. 10-01-2026 08:38 PM
Bmx with 26 inch wheels 10-01-2026 05:50 PM
Gila Monster Gran Fondo 10-01-2026 05:41 PM
Hatch Chiles Rule! 10-01-2026 05:10 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom