Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


FALCON FW-842 8 Speed 13-42T Freewheel
#1
Can I replace the MF-TZ500-7 SHIMANO on the rear wheel (Formula DC-31 hub, alloy, 6-bolt, 6/7/8-speed freewheel) with this FALCON FW-842 8 Speed 13-42T Freewheel for my Trek Marlin 4?
  Reply
#2
Yes, as long as the threads are the same for the hub and freewheel.

7 and 8 have the same stack height, but the spacers are a little narrower to enable the extra gear.
  Reply
#3
Compatibility in bike components is crucial for proper functioning and safety
Shimano MF-TZ500-7 is a 7-speed freewheel, while the Falcon FW-842 is an 8-speed freewheel. The number of speeds must match the shifter, derailleur, and other drivetrain components. 8-speed freewheel will require a narrower chain designed for 8-speed drivetrains too
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
braking by reversing the pedals
Yesterday 09:23 PM
suspicious broken part after service--is...
Yesterday 05:53 PM
Beautiful bikes
Yesterday 05:46 PM
Chain skips under heavy load when pedall...
Yesterday 05:37 PM
Next adventure or repeat the same..
Yesterday 05:25 PM
Are carbon frames fragile?
Yesterday 05:14 PM
New around here
Yesterday 09:08 AM
Would you buy any bike products from Tem...
Yesterday 04:24 AM
New to the Forum - Introduction
Yesterday 03:30 AM
I don't usually wear a bike helmet. Does...
07-20-2026 01:03 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
28 posts
no avatar 2. Mr. Beanz
21 posts
no avatar 3. GirishH
18 posts
no avatar 4. meamoantonio
17 posts
no avatar 5. rydabent
13 posts