Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


What's the function of the pin clip of shifter cable adjuster?
#1
Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.

   

My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.
  Reply
#2
(06-15-2023, 12:06 AM)Bob Fuji Wrote:  Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.



My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.

I do not have that clip on my adjusters, but I think it is just to keep the position of the adjustment. You may notice that when you are adjusting the unit it has detents as you rotate it. If it is serving the purpose of retaining your adjustment then you may be able to use some teflon tape around the threads or some light duty thread locker to prevent it from changing position. You may not need it at all, but I assume if it was designed that way than it must serve a purpose.
Hopefully, someone else has first hand knowledge of that part.
  Reply
#3
Thank you very much. I will try not using it.


(06-15-2023, 12:17 AM)Sybian Wrote:  
(06-15-2023, 12:06 AM)Bob Fuji Wrote:  Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.



My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.

I do not have that clip on my adjusters, but I think it is just to keep the position of the adjustment. You may notice that when you are adjusting the unit it has detents as you rotate it. If it is serving the purpose of retaining your adjustment then you may be able to use some teflon tape around the threads or some light duty thread locker to prevent it from changing position. You may not need it at all, but I assume if it was designed that way than it must serve a purpose.
Hopefully, someone else has first hand knowledge of that part.
  Reply
#4
The adjusters normally have some kind of spring mechanism that lock them in place so they don't move once you've set the tension. Normally, it's a coil spring inside the adjuster but I assume yours is a different design?
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Bike navigation via your phone
Yesterday 07:38 PM
Where do you put your phone when riding?
Yesterday 07:33 PM
Greetings from W.N.Y.
Yesterday 05:21 PM
Would an Advanced Society Benefit from B...
Yesterday 12:10 PM
What must-know bike care tips are we ove...
Yesterday 11:06 AM
New in ROC
03-17-2025 09:20 PM
Barefoot Shoes--- ON or OFF?
03-17-2025 09:01 AM
A New Hope For Cheaper Bikes In 2025?! f...
03-17-2025 05:21 AM
Best suspension seat post?
03-17-2025 02:54 AM
Which cycling manager games are you play...
03-16-2025 06:42 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
14 posts
no avatar 2. enkei
13 posts
no avatar 3. rydabent
11 posts
no avatar 4. GirishH
10 posts
no avatar 5. Jake1
9 posts