Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


What's the function of the pin clip of shifter cable adjuster?
#1
Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.

   

My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.
  Reply
#2
(06-15-2023, 12:06 AM)Bob Fuji Wrote:  Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.



My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.

I do not have that clip on my adjusters, but I think it is just to keep the position of the adjustment. You may notice that when you are adjusting the unit it has detents as you rotate it. If it is serving the purpose of retaining your adjustment then you may be able to use some teflon tape around the threads or some light duty thread locker to prevent it from changing position. You may not need it at all, but I assume if it was designed that way than it must serve a purpose.
Hopefully, someone else has first hand knowledge of that part.
  Reply
#3
Thank you very much. I will try not using it.


(06-15-2023, 12:17 AM)Sybian Wrote:  
(06-15-2023, 12:06 AM)Bob Fuji Wrote:  Hi,

I'm replacing my bike shifter's cables, and I found I lost one of the pin clip of the shifter cable adjuster.



My question is: What is it for? What function does it do? Do I really need it (buy a new set)?

Thank you.

I do not have that clip on my adjusters, but I think it is just to keep the position of the adjustment. You may notice that when you are adjusting the unit it has detents as you rotate it. If it is serving the purpose of retaining your adjustment then you may be able to use some teflon tape around the threads or some light duty thread locker to prevent it from changing position. You may not need it at all, but I assume if it was designed that way than it must serve a purpose.
Hopefully, someone else has first hand knowledge of that part.
  Reply
#4
The adjusters normally have some kind of spring mechanism that lock them in place so they don't move once you've set the tension. Normally, it's a coil spring inside the adjuster but I assume yours is a different design?
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Schwinn trike NOISE
Today 05:20 PM
Schwinn meridian rear drive axle
Today 04:36 PM
What was your first bicycle?
Yesterday 04:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
Yesterday 05:38 AM
Charging at campground
Yesterday 05:33 AM
Failure to stop at stop sign means $500 ...
Yesterday 05:27 AM
Bicycle enthusiast located in California
Yesterday 04:15 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 01:29 AM
Do you plan or random ride your MTB ride...
11-02-2024 11:43 AM
Cycling is Anti-Aging, But There's a Cat...
11-02-2024 11:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. enkei
18 posts
no avatar 3. GirishH
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Talha
10 posts