New: Take part in the April 2020 Giveaway for a brand new GIORDANO™ bicycle

Welcome guest! Register or sign in to participate in the cycling discussions.


Adjusting shifter cable on SA AW hub
#1
I rebuilt my 1969 Sears 3speed(Sturmey Archer AW knockoff) hub. It works fine, but my issue is that I have to adjust the cable so tight that I can just barely click it into 1st gear. Sheldon says there should be a little give in the indicator chain for 1st gear. Any ideas?
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Adjusting Tektro R40 for wider tire jjmatt47 0 3,591 07-03-2017, 07:07 PM
Last Post: jjmatt47
  Shifter/Cable Slack fishfighter 3 8,270 11-27-2015, 05:50 PM
Last Post: Painkiller
  Shifter Cable in FD Won't Listen Wazzawazzarum 3 4,977 07-16-2014, 12:17 PM
Last Post: cny-man
  Rear shifter not connected to tensioned cable? insurgasaurus 5 6,095 03-31-2014, 05:00 PM
Last Post: insurgasaurus
  Gear cable disconnected from gear shifter Thatkidnoonelikes 2 6,284 11-11-2013, 07:11 PM
Last Post: nfmisso
  Adjusting the derailleur inwards for each step? (pic heavy) Ivo 24 18,849 11-03-2013, 05:19 PM
Last Post: GeorgeET
  Adjusting brakes and pads PBells 2 4,793 09-13-2013, 11:58 PM
Last Post: 1FJEF
  Adjusting 105 FD problems larsonian 13 11,141 04-06-2013, 09:21 PM
Last Post: Joe_W
  Replace shifter cable or cable + housing? larsonian 2 9,384 01-12-2013, 08:32 PM
Last Post: larsonian
  Adjusting Barrel redstar178 6 5,974 09-06-2012, 03:13 AM
Last Post: Bill

Forum Jump: