How do I crack open a ROLF Satellite hub?

07-19-2008, 07:05 PM

Alex,
This is a ROLF Satellite hub. Not sure how to crack it open? Two cone wrenches I guess?
Chuck
<img src="http://bikeride.com/images/forums/0004.jpg" />

Alex Ramon · 07-19-2008, 07:06 PM

Hi Chuck,
That's a nice hub... hope you can get it fixed. Yup, two cone wrenches should do it... put one on the flats closest to the hub, hold it tight, and then loosen the outer nut counter-clockwise.

07-19-2008, 07:06 PM

Thanks Alex... I'll let you know how it goes.

07-19-2008, 07:06 PM

Got it done. The bearings were worn and there was just enough grease in there to coat the bearings. hardly any grease in there at all. I put new bearings in there and greased the hub up good. Cannot hear any hollow clicking noises now. Thanks for your help.

Alex Ramon · 07-19-2008, 07:07 PM

Glad to hear it worked out, that's super!

10 Latest Posts
New to the Forum - Introduction Yesterday 05:38 PM
Would you like a pizza after cycling? Yesterday 02:10 AM
Hardtail as only bike? 07-12-2026 05:23 PM
Spoke Count Preference 07-12-2026 09:17 AM
Pros & Cons of presta valve vs schrader ... 07-12-2026 03:34 AM
Are you mainly into Mountain Biking, Roa... 07-12-2026 02:20 AM
New around here 07-11-2026 10:53 AM
Favorite MTB brand? 07-10-2026 03:16 AM
29"front & 26" rear? Thoughts? 07-10-2026 03:13 AM
suspicious broken part after service--is... 07-09-2026 02:45 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom