Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


"Frozen" Stem
#1
Your tutorials are so useful that I've recommended it to my readers, and I've learned plenty from them myself. Perhaps you could address how to free a stem which has become "frozen" in place. I've an old Schwinn Traveler which I'd like to restore, but the alloy stem has corroded and cannot be adjusted, never mind removed. Any ideas on how to free it up?

I've tried soaking it with WD-40, then smacking the stem with a rubber mallet, but to no avail.

Thanks.
Tamia
  Reply
#2
Thanks Tamia,

If the WD-40 doesn't work I would try Liquid Wrench (it works a little better). On rare occasions I've seen seized stems that were so severe that they couldn't be removed (let's hope that's not the case).

<a href="http://www.bikeforums.net/showthread.php?t=73823">This discussion</a> on bikeforums might also help.
Good luck, I hope you get it out!
  Reply
#3
This is one of the hardest problems to solve on bike.

Steel expands significantly as it corrodes so penetrants will only work in the early stages, before the corrosion had really gripped the stem/post. After this stage, usually only brute force or heat will give any result, and some times not even that.

In the case of the stem, try inserting a steel bar from below and hammering it out, usually works for me. Worst case scenario with a seat post is to cut it off level with the seat tube and hammer it down so that you can fit another above it, check the lengths first, though!

You may be able to use this type of saw if the reach is long enough, after first cutting off as much of the stem/post as you can:
http://www.screwfix.com/prods/24625/Power-Tools/Power-Saws/Titan-18V-Cordless-Reciprocating-All-Purpose-Saw#

Remember at all times that the frame needs supporting and protecting from damage and that heat may damage the paintwork.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
11,971
04-07-2016, 05:57 PM
Last Post: Painkiller
 
2,828
10-25-2015, 06:23 AM
Last Post: Eugbug
 
14,904
04-24-2010, 07:43 PM
Last Post: tlahwright
 
15,162
02-19-2010, 03:08 PM
Last Post: Familycat
 
19,743
01-08-2010, 08:38 AM
Last Post: Bill
 
10,299
05-09-2009, 01:19 PM
Last Post: frsher
 
5,369
09-01-2008, 05:10 PM
Last Post: Alex Ramon

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts