Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the September Giveaway to Win the Luckeep X1 Pro ebike


Re-spray alloy Cannonade (US made frame)
#1
Hi

I have an old Cannonade Bad Boy. Frame was made in the US. The paint has bubbled all over the place and the alloy has oxidised underneath it. I want to strip it - check the frames integrity and then re-spray it if it's not compromised.

Before anyone starts - I'm aware how about intensive stripping frames by hand is. I've done this with a couple of steel bikes.

Questions are:
What's the best paint stripper for an alloy bike? Nitromors? Is there something better?

What's the best primer for alloy? Have read this is good:

https://www.amazon.co.uk/U-Pol-ACID-Acid-Etch-Primer/dp/B006HFM5YG/ref=sr_1_fkmr1_1?ie=UTF8&qid=1475159078&sr=8-1-fkmr1&keywords=Upol+etch+primer+bike

What's the best paint. By best, I mean - most resilient to sweat & water. Want to avoid the oxidation for as long as possible (Hammerite?) (nb - looking for a matt black finish).

Thanks
  Reply
#2
Are you planning on use spray cans for the whole job, Like primer in your link
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(09-29-2016, 05:14 PM)painkiller Wrote:  Are you planning on use spray cans for the whole job, Like primer in your link

Hi there. Thanks for getting back.

Yes. Planning to use spray cans. Previously found that with a bit of care could get a clean finish.

e
  Reply
#4
(09-29-2016, 05:20 PM)ebgt Wrote:  
(09-29-2016, 05:14 PM)painkiller Wrote:  Are you planning on use spray cans for the whole job, Like primer in your link

Hi there. Thanks for getting back.

Yes. Planning to use spray cans. Previously found that with a bit of care could get a clean finish.

e
I use an Aircraft stripper for a lot of things alloy, comes in a spray can found at many Auto parts store here in the US. etching primer would work or a zinc chromate type of primer. Cannot recommend a top coat in your area. I would go with an automotive paint and clearcoat myself. Here in the US automotive paint suppliers are able to make spray cans for you. Look into that in your area
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
12,812
04-03-2014, 01:37 PM
Last Post: warrenpe
 
13,170
10-02-2012, 09:08 PM
Last Post: RobAR
 
6,761
01-27-2012, 07:11 PM
Last Post: Sparky

Forum Jump:

[-]
10 Latest Posts
R.I.P. Irio Tommasini
Yesterday 11:41 PM
Third best reason to ride a bent or trik...
Yesterday 11:24 AM
Naming a bicycle - Yes or No?
10-08-2024 06:22 PM
Custom built Virtue 7 city/path bicycle
10-08-2024 04:36 PM
Broken Bottom Bracket
10-08-2024 01:43 AM
COLNAGO SUPER (unknown year)
10-07-2024 10:42 PM
SURVEY: Enhancing Bicycle Experience wit...
10-07-2024 12:50 PM
Help finding out my vintage Biachi model
10-07-2024 12:28 PM
Community Discussion Cycling Myths
10-06-2024 01:23 PM
Change comes hard in the cycling communi...
10-06-2024 10:33 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
25 posts
no avatar 2. Jesper
24 posts
no avatar 3. Flowrider
15 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Painkiller
12 posts