Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


How thoroughly to clean BB before re greasing/assembling.
#1
I've read a bunch of tutorials (including the sticky here) and the only part i'm unsure of is how thoroughly one must clean out all the old grease before regreasing and reassembling.

I've wiped everything down and it is reasonably clean. Wondering if that bit of grease stuck in the bearing ring will contaminate and ruin the new grease or if a bit of mixing doesn't matter and the cleaning step is just mentioned out of completeness?

And a secondary question would be what product to use to clean them. i don't currently have access to any solvents so i'd be buying something and just want to not end up with something overly harsh/dangerous or custom/expensive.

Also doing the rear hub with coaster brake. This is a kids 14" bike. I assume the same question applies there.

Any thoughts appreciated
  Reply
#2
A bit of old grease likely won't hurt anything, but old grit or debris trapped in that old grease could. Since you've got the parts opened up, I can't see any real reason not to take the extra couple minutes and get them fully clean Old grease residue could also be covering up damage to the parts themselves that you'll want to see. If the old grease is so hardened up it doesn't wipe out, try using the end of a plastic spoon or something similar as a scraper. Just use something soft enough it won't scratch the metal parts.

You don't need anything too harsh for cleaning normally. Simple Green, window/surface cleaner, rubbing alcohol. Even dish soap will help. The key to is make sure to get all the cleaning solution out before you reassemble. A few drops of any cleaner will destroy the new grease.
  Reply
#3
Engine degreaser from the auto parts store (spray can) works well too and gets the job done fast. Spray let set a couple min. and rinse with water, then dry. It is always better to remove all grease. I find this method even adds an extra sparkle to many parts also. like derailleurs and such. Safe for use on plastic too.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
25,066
02-08-2015, 11:22 AM
Last Post: JanJ
 
6,256
08-22-2014, 09:40 PM
Last Post: barney
 
29,270
08-03-2011, 07:20 PM
Last Post: nfmisso
 
39,553
06-22-2011, 03:47 AM
Last Post: Dalton2250

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts