Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Trying to remove pedals....wtf
#1
Ok so long story short ive been trying to remove a pedal for a while now. Never have been able to. Today i decided to try an idea from a family member....heat the metal, then try to loosen it. And when i did, THIS happened. And I STILL can't get the mofo unscrewed. Any ideas?


[Image: 73i3bm.jpg]

[Image: 11bu25z.jpg]

[Image: 2rcr020.jpg]
  Reply
#2
I have removed lots of pedals without ever running into that. You know, I presume? that the left pedal loosens clockwise? opposite to the right pedal.

(05-07-2015, 08:47 AM)Psylock1045 Wrote:  Ok so long story short ive been trying to remove a pedal for a while now. Never have been able to. Today i decided to try an idea from a family member....heat the metal, then try to loosen it. And when i did, THIS happened. And I STILL can't get the mofo unscrewed. Any ideas?


[Image: 73i3bm.jpg]

[Image: 11bu25z.jpg]

[Image: 2rcr020.jpg]
"Where ever we go, there we are"
  Reply
#3
Looks like there's a steel insert inside an aluminum crank arm. 
Yes, first thing is to make sure you're unscrewing the right direction as left pedals have reverse threads.

One thing you can do now that the crank's toast anyway - hack saw a cut into that steel insert as far down as you can without damaging the pedal. Then put a big screwdriver in the slot and give it a wack. You may be able to crack the insert or at least loosen it enough to unscrew the pedal.
  Reply
#4
What size nuclear plasma torch did you use on that?
Unfortunately now you're looking for a new crankset.
Craig Domingue - East Texas Hick
  Reply
#5
Lol i used a little bic lighter to heat it. It appears that someone had previously repaired it and thats what it looks like with the rubber cement lookin stuff melted. And nah, this was off a parts-bike, that i was trying to take the pedals from to put on my main bike. So the crank is of no importance.
  Reply
#6
Ah, so if you can, put the steel insert in a vise and try again.
Or hit up Wallyworld.
Craig Domingue - East Texas Hick
  Reply


Forum Jump:

[-]
10 Latest Posts
1987 Tommaso Alloy lugged frame
Today 10:06 AM
Food after late training ride
Yesterday 02:48 PM
Injury Recovery
Yesterday 08:20 AM
RECOMMENDATION
04-24-2025 04:24 PM
New Member
04-24-2025 03:31 PM
2011 GT Tachyon upgrade/mod
04-24-2025 08:45 AM
Doctors are Prescribing Cycling
04-23-2025 09:50 PM
What was your first bicycle?
04-23-2025 09:17 PM
New Rider Here — Momo + Viribus = Ready ...
04-23-2025 09:15 PM
The great thing about trikes
04-23-2025 03:47 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
24 posts
no avatar 2. SPINMAN
14 posts
no avatar 3. meamoantonio
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Painkiller
11 posts