V-Brake posts?

!TREK4ME! · 01-27-2015, 07:14 PM

I'm trying to get an old Cannondale M500 mtb back rolling again. I'm missing the post that screws into the fork on each side and the back seat stay post too, so I can install some v-brakes. I'm not sure what the true name for these post are or where to find them. Anybody know... ??
See pics...
Thanks

Painkiller · 01-27-2015, 07:29 PM

it is nice to know the thread size and pitch, common are m8, m10 sized. they are called cantilever bosses, v-brake bosses. etc...
Measure the inside of the hole in MM and guess from there. they are obtainable about anywhere, just google it once you think you know the size you have.

!TREK4ME! · 01-27-2015, 07:48 PM

Awesome !!!... Thanks painkiller !!!!!!!!!!!!...
Got to be 8mm, because I tried another set from a another frame and the thread bosses were to big for this one. I'll check ...
Thanks again !!!!

nfmisso · 01-28-2015, 07:03 PM

Problem Solvers has some. http://problemsolversbike.com/products/cantilever_studs

10 Latest Posts
Are you mainly into Mountain Biking, Roa... Yesterday 11:08 AM
Are 26" really dying out? Yesterday 11:02 AM
Wanted \| Magura Louse or Julie rear Yesterday 04:03 AM
Hatch Chiles Rule! 11-09-2026 04:56 PM
Should eBikers have to get an eBike lice... 11-09-2026 05:21 AM
How Bad Are E-bikes By You? 11-08-2026 10:29 PM
Shortness of breath. 11-08-2026 09:56 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom