V-Brake posts?

!TREK4ME! · 01-27-2015, 07:14 PM

I'm trying to get an old Cannondale M500 mtb back rolling again. I'm missing the post that screws into the fork on each side and the back seat stay post too, so I can install some v-brakes. I'm not sure what the true name for these post are or where to find them. Anybody know... ??
See pics...
Thanks

Painkiller · 01-27-2015, 07:29 PM

it is nice to know the thread size and pitch, common are m8, m10 sized. they are called cantilever bosses, v-brake bosses. etc...
Measure the inside of the hole in MM and guess from there. they are obtainable about anywhere, just google it once you think you know the size you have.

!TREK4ME! · 01-27-2015, 07:48 PM

Awesome !!!... Thanks painkiller !!!!!!!!!!!!...
Got to be 8mm, because I tried another set from a another frame and the thread bosses were to big for this one. I'll check ...
Thanks again !!!!

nfmisso · 01-28-2015, 07:03 PM

Problem Solvers has some. http://problemsolversbike.com/products/cantilever_studs

10 Latest Posts
New rider Yesterday 11:27 PM
Mountain Biking with or with out sunglas... Yesterday 11:23 PM
How Bad Are E-bikes By You? Yesterday 11:12 PM
Catastrophic bicycle failures Yesterday 11:08 PM
2007 Trek Pilot S.P.A. 5.2 Yesterday 05:40 PM
I don't usually wear a bike helmet. Does... Yesterday 03:51 PM
Impromptu bikepacking/touring dilemma.. 10-01-2026 08:38 PM
Bmx with 26 inch wheels 10-01-2026 05:50 PM
Gila Monster Gran Fondo 10-01-2026 05:41 PM
Hatch Chiles Rule! 10-01-2026 05:10 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom