V-Brake posts?

!TREK4ME! · 01-27-2015, 07:14 PM

I'm trying to get an old Cannondale M500 mtb back rolling again. I'm missing the post that screws into the fork on each side and the back seat stay post too, so I can install some v-brakes. I'm not sure what the true name for these post are or where to find them. Anybody know... ??
See pics...
Thanks

Painkiller · 01-27-2015, 07:29 PM

it is nice to know the thread size and pitch, common are m8, m10 sized. they are called cantilever bosses, v-brake bosses. etc...
Measure the inside of the hole in MM and guess from there. they are obtainable about anywhere, just google it once you think you know the size you have.

!TREK4ME! · 01-27-2015, 07:48 PM

Awesome !!!... Thanks painkiller !!!!!!!!!!!!...
Got to be 8mm, because I tried another set from a another frame and the thread bosses were to big for this one. I'll check ...
Thanks again !!!!

nfmisso · 01-28-2015, 07:03 PM

Problem Solvers has some. http://problemsolversbike.com/products/cantilever_studs

10 Latest Posts
New to the Forum - Introduction Yesterday 05:38 PM
Would you like a pizza after cycling? Yesterday 02:10 AM
Hardtail as only bike? 07-12-2026 05:23 PM
Spoke Count Preference 07-12-2026 09:17 AM
Pros & Cons of presta valve vs schrader ... 07-12-2026 03:34 AM
Are you mainly into Mountain Biking, Roa... 07-12-2026 02:20 AM
New around here 07-11-2026 10:53 AM
Favorite MTB brand? 07-10-2026 03:16 AM
29"front & 26" rear? Thoughts? 07-10-2026 03:13 AM
suspicious broken part after service--is... 07-09-2026 02:45 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom