Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the January Giveaway for the DYU R1 20" City Electric Bike


Rear dérailleur not working [PHOTO]
#1
Hi guys,

So I've recently noticed that my rear dérailleur has almost completely lost its ability to shift the chain between sprockets (on a good day, it can move between two of the seven rear sprockets).

I think I've found the source of the problem in the shift mechanism:

[attachment=5372]

In the photo, you can see the dérailleur cable enter a white plastic part (just below the "2"). You can also see some big metal wires emerging from the housing and meeting this white plastic part (just below the "1").

When the dérailleur shift lever tries to pull the cable to the right in the photo, those big metal wires coming out of the housing bash up against the white plastic part and stop the cable from going any further.

My trouble is that I don't even know what those big metal wires are or why they are there. There is no sign of them when the cable emerges at the other end: at the actual rear dérailleur. Does anyone know what they are? What would you advise to fix?

Ryan.
  Reply
#2
Those are broken strands of your shift cable. A cable by definition is made of separate wires twisted together. The function of the cable is to move the derailleur, so if the cable is damaged it can't do its job. It may also be corroded or kinked inside the housing. The cable and very probably the housing need to be replaced. You need to make sure you get index compatible shift housing.
  Reply
#3
Thank you for your reply cny-man, but I don't think they're broken strands of the shift cable. I've been able to pull the housing back, and the big metal wires go back with it:

[attachment=5373]

If they were strands of the shift cable, I doubt that circa 12 of them could all break cleanly in the same spot (although I can totally imagine why they seemed like strands of the cable from my first photo).

I now think that they are part of the housing that surrounds the actual shift cable. I think that this is intact and is seen inside the white plastic part. Backing this up, a shift cable of the exact circumference of the cable inside the white plastic part emerges at the actual rear dérailleur:

[attachment=5374]
  Reply
#4
My error - could not see clearly before. They are indeed the wires of the housing, which have escaped the ferrule, and will indeed ruin the shifting. Need to replace ferrule and possibly cut housing end slightly.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Brand New Rusty Steel Split frame Bike
Today 12:55 AM
Breaking in Brooks B17 Imperial
Yesterday 03:42 PM
Big Basso, Tiny Colnago
Yesterday 03:26 PM
ebikes and regular bikes
Yesterday 03:15 PM
Customer service
Yesterday 02:48 PM
First Century
Yesterday 02:08 PM
Ethical Dilemma
01-14-2022 09:00 PM
Failure to stop at stop sign means $500 ...
01-14-2022 01:54 AM
How much do you bike per year?
01-12-2022 09:42 PM
Counsel on a ‘73 Raleigh
01-12-2022 02:55 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
24 posts
no avatar 2. ReapThaWhirlwind
17 posts
no avatar 3. Jake1
14 posts
no avatar 4. jeffg
11 posts
no avatar 5. JR Namida
10 posts