New: Take part in the January 2020 BikeRide Giveaway for a HEDKAYSE | ONE bike helmet

Welcome guest! Register or sign in to participate in the cycling discussions.


Help removing a broken stem bolt
#1
While trying to remove my old 3ttt black quill stem, the bolt on the top that loosens the stem broke off as shown in the picture. I've read that you can cut off the stem, but I currently do not have access to those kind of tools. Are there any other ways that I can remove the stem?
Aloha
  Reply
#2
Do you have access to an Electric drill & drill bits? Start with small bits & drill the bolt head off.
  Reply
#3
An angle grinder is a useful tool:
http://www.harborfreight.com/4-12-angle-grinder-60625.html

Makes short work of many annoying things.....
Nigel
  Reply
#4
You can probably take it to any local bike shop, they should fix this on the spot.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Are my hairline cracked or broken carbon fibre handlebars broken or useable? ponyopo 1 6,414 07-29-2016, 06:10 AM
Last Post: Joe_W
  Removing a very old Regina America Freewheel Rutheen 3 4,465 08-20-2014, 06:52 PM
Last Post: DaveM
  Removing rust from inside frame! Winto 3 8,242 06-06-2014, 08:17 PM
Last Post: nfmisso
  How can i remove stem with missing top bolt. frontrowclub 3 6,801 01-26-2014, 06:41 PM
Last Post: nfmisso
  Replace rear axle bolt with longer bolt on an electra 3-speed michelehart 5 6,642 11-03-2013, 07:46 PM
Last Post: michelehart
  Removing grips Myosmith 18 30,407 09-09-2013, 09:12 PM
Last Post: Painkiller
  Which way to turn the wrench when removing pedals bikesmith1 9 70,679 11-04-2012, 03:53 AM
Last Post: Bill
  Removing bolt from crank krashTest 10 8,779 10-08-2012, 03:06 AM
Last Post: GeorgeET
  Advice on removing crank Monch 4 6,280 09-16-2012, 11:05 PM
Last Post: Bill
  Can't tighten bolt into stem FeelingStupid! 1 9,434 09-15-2012, 11:12 PM
Last Post: Painkiller

Forum Jump: