Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the October Giveaway to Win the Qiolor TIGER Retro Electric Bike


New chain, chain slips in certain gears??
#1
Hey Guys,
Replaced the chain on the old Mongoose Sycamore and everything seemed to be working fine on the bike rack, but when I took it out for a test ride it seems to be slipping a tooth or something when I shift to the smaller cassette gears(only does this when I crank down harder on the pedals). I measured the chain and put the exact length back on. The chain that was on it was worn to the 1.0 limit on the chainwear cheaker, but the cassette teeth and the chainwheel teeth looked fine.
I have a GT Talera that I did the same thing with and it is doing the same thing.
What's happening here??
Both bikes have been cleaned up and completely relubed.
Also, I replaced the chains with the Bell multispeed chains from my local Walmart.
Thanks,
PJ
  Reply
#2
I would bet that the cassette teeth are worn, especially given that the chains were are the limits.

Take a look at the 2nd picture:
http://sheldonbrown.com/chains.html#wear
Nigel
  Reply
#3
I'll take a closer look(with my glasses on). I'll bet you are right on.
So, with the chain gauge, when should I replace the chain?... at .75 or 1.0 to keep from wearing the cassettes and chainwheels??
  Reply
#4
Well, as soon as there is wear on the chain the sprockets and chainrings will also start to be worn. You can prolong their life if you replace regularly. I replace the chain when the Rohloff Caliber aluminium side drops in but the steel side still is out side. I don't have it with me, but I think it is between .75 and 1.0mm. So for this seems to work. I am now on the third chain on my road bike and it still shifts and rides well. I don't have an overview over how long the chains lasted, so I cannot say if theire life time is now shorter.
  Reply
#5
Awesome !!!...
Thanks !!!!!!!!
  Reply
#6
Hey Guys,
I've got a question:
Why didn't the old chain that I replaced on these bikes slip like the new one is doing, even though the freewheel is most likely worn, which is why the new chain is slipping on the old freewheel, but not slipping with the old chain??
  Reply
#7
The old (worn) chain did better match the worn sprockets.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Schwinn trike NOISE
Today 05:20 PM
Schwinn meridian rear drive axle
Today 04:36 PM
What was your first bicycle?
Yesterday 04:11 PM
Great UK Cycle Camping Map, For E-Bikes,...
Yesterday 05:38 AM
Charging at campground
Yesterday 05:33 AM
Failure to stop at stop sign means $500 ...
Yesterday 05:27 AM
Bicycle enthusiast located in California
Yesterday 04:15 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 01:29 AM
Do you plan or random ride your MTB ride...
11-02-2024 11:43 AM
Cycling is Anti-Aging, But There's a Cat...
11-02-2024 11:36 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
18 posts
no avatar 2. enkei
18 posts
no avatar 3. GirishH
13 posts
no avatar 4. Flowrider
12 posts
no avatar 5. Talha
10 posts