Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Tool to remove stripped bolt
#1
Good morning

I want to transfer my shifters to a new handle bar but one of the allen head bolts is stripped . Can any on recomend process and tools that i can use to get it out with out damaging anything ..

Thanks guys
  Reply
#2
try using a wide rubber band, place it over the socket and push the allen in and try it again, sometimes even a torx allen and rubber band will get it popped loose. play around with it till you get the right combo, sometimes a sae size will work also. If you know someone that has an impact screw driver will work.
http://www.sears.com/schwaben-impact-screwdriver-set/p-00930680000P?sid=IDx01192011x000001&kpid=00930680000P&kispla=00930680000P
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
Thanks for the prompt response. i will Look into getting that tool. i have tried to go a size up on the allen and a torx and also using both the american and metric. no luck with that. i was going to try to dril it out but didnt want to damage the shifter..

ill try this as well now.

thanks for the info.
  Reply
#4
on bolts like yours and tiny screws like on plastic shifter bezels, all have come out with the rubber band technique and inpact screw driver once you find the right combo. Has not let me down yet! post back about your success
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
I have had success with a motor tool (aka Dremel). On method is to cut a slot in the head and use a flat bladed screw driver.

For replacement bolt, if you can get one the right size, go with Torx, and the worry is gone.
Nigel
  Reply
#6
(07-18-2013, 01:28 PM)jimboslice23 Wrote:  Good morning

I want to transfer my shifters to a new handle bar but one of the allen head bolts is stripped . Can any on recomend process and tools that i can use to get it out with out damaging anything ..

Thanks guys

Are the threads stripped or the bolt head rounded out ?
Get more info on this topic at :www.doityourselfbicyclerepair.com

Please respond with any new ideas !

Thanks,

Jimmy
  Reply
#7
be careful with the heat on the sensor. I had the same problem and ended up tearing and crushing the exhaust. Then I had to get someone to re-weld the pipe and fitting.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Energy gels for cycling
Today 11:16 PM
eBikes are banned in these places!
Today 05:02 AM
What are the pros and cons of clip-on pe...
Today 04:56 AM
Trail Mountain Bike 4 sale/ CASH ONLY.
02-23-2025 02:29 PM
Best way to thoroughly clean a chain?
02-22-2025 08:50 PM
Cycling industry is pricing out their ow...
02-22-2025 01:00 PM
Peugeot Nouveau Folder
02-21-2025 05:24 PM
The great thing about trikes
02-21-2025 12:11 PM
CALLING UK CYCLISTS! - Take Action to Fu...
02-19-2025 08:25 AM
Club Rides
02-17-2025 09:24 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
16 posts
no avatar 2. GirishH
15 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. enkei
13 posts
no avatar 5. rydabent
9 posts