Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Rebuilding freewheel: Is this grease OK?
#1
Hi all, I'm disassembling and cleaning out my old SunTour freewheel, it had got so gummy the ratcheting wasn't happening. Once everything's clean and ready to re-assemble, will it be allright to use the same grease I already have for my motorcycle axles? It's an automotive product called "Industrial Moly EP Grease," "...an NLGI No. 2 grease containing molybdenum disulfide..." its listed applications include "Automotive Chassis, Wheel Bearings, Universal Joints." I live quite a ways from a bike shop, so it would be very convenient to be able to use this stuff. But of course I don't want to have to do this twice, or have to clean the grease off all the little ball bearings and such... I think I read somewhere that a petroleum-based grease might not be appropriate... opinions? Thanks!

[attachment=4105]

[attachment=4106]
  Reply
#2
Good stuff - that'll work
  Reply
#3
(04-25-2013, 07:20 PM)DaveM Wrote:  Good stuff - that'll work

'ppreciate it. Cheers!
  Reply
#4
Good grease, just don't put too much in and it'll be fine!
  Reply
#5
make sure the pawls will move freely to engage and disengage with this grease before you totally re-assemble it.

Generally the internals of a freewheel work better with a light oil; but the bearings work better with grease.
Nigel
  Reply
#6
allright, i feel a lot more confident. i'll be sparing with the grease and put a little oil on the pawls. thanks everyone!
  Reply
#7
Did you check with your motorcycle manufacturer if the Moly grease is suitable for bearings? (most modern motorcycles have sealed bearings that are replaced) Moly grease is excellent for sliding surfaces such as clutch splines , used very sparingly. I use it on my 1982 BMW for rear wheel splines and clutch transmission splines. For bearings I use Bel Rey waterproof grease (blue lid) you see it on the race tracks.

I use Honda Moly grease, although there are others and the one you have looks good. It will be good for the freewheel brushed on. On a bicycle most automotive and marine greases are OK due to low loads...I do not like lithium, except for levers and such , but that's me......Use what you got.
Never Give Up!!!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
34,394
10-10-2012, 05:50 PM
Last Post: SPANNER
 
65,347
07-06-2012, 11:49 PM
Last Post: jeracravo
 
16,239
06-28-2012, 02:28 AM
Last Post: Joe_W
 
Guest
115,811
02-06-2012, 01:41 PM
Last Post: nfmisso
 
90,470
12-22-2011, 02:10 PM
Last Post: Joe_W
 
38,689
08-03-2011, 07:20 PM
Last Post: nfmisso
 
23,882
07-04-2011, 10:30 PM
Last Post: gcb
 
48,733
06-22-2011, 03:47 AM
Last Post: Dalton2250

Forum Jump:

[-]
10 Latest Posts
With new technology your next e-bike cou...
Yesterday 05:23 PM
Your next ebike could have two motors, b...
11-16-2026 07:09 PM
How Bad Are E-bikes By You?
11-16-2026 07:01 PM
Shortness of breath.
11-16-2026 06:56 PM
Are you mainly into Mountain Biking, Roa...
11-16-2026 06:54 PM
Hatch Chiles Rule!
11-16-2026 05:29 PM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
Hello All
11-06-2026 09:03 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
21 posts
no avatar 2. meamoantonio
11 posts
no avatar 3. ReapThaWhirlwind
8 posts
no avatar 4. GirishH
8 posts
no avatar 5. Sidewinder
8 posts