Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for an Electric Commuter Bike from KBO Bike


Replacing old brittle cables
#1
Greetings:
New guy here again.
I will be replacing brake and shift cables on my 43 year old Raleigh Grand Prix. It's been hanging from my rafters for 20+ years, and the cables are old, dry, rusty and ready to snap. Before that happens, I'd like to replace them, but not sure where to start. Will I need any sort of special tools? Also, are there specific cables I'll need to source for this old bike? ANY advice on replacing the cables will be greatly appreciated!
TIA!
  Reply
#2
(01-03-2013, 04:20 PM)JoeFaz Wrote:  Greetings:
New guy here again.
I will be replacing brake and shift cables on my 43 year old Raleigh Grand Prix. It's been hanging from my rafters for 20+ years, and the cables are old, dry, rusty and ready to snap. Before that happens, I'd like to replace them, but not sure where to start. Will I need any sort of special tools? Also, are there specific cables I'll need to source for this old bike? ANY advice on replacing the cables will be greatly appreciated!
TIA!

First out of love of bike mind posting a picture of your ride Smile ? Going on the picture would be helpful to see what kind of brake set you have in order for us to help determine what you are looking for.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Hi Joe;

Bill likes to look at pictures Smile

The standard Bell set of replacement cables will work fine - $6 at Wal-mart. There are "better" cables out there, but most of us can not tell a functional difference.

You will need a cable cutter - these are hard steel cables, so a properly hardened tool is required. I have a Craftsman diagonal cutter that works well, and I have other Craftsman diagonal cutters that do not work at all.....

* a wrench to fit the bolts that retain the cable on the brakes.
* pliers to pull and hold the cable tight while you tighten the retaining bolt.
* light oil to lubricate the inside of the housings
* if your bike does not have quick release for the brakes, a third hand (clamp) to hold the brake pads against the rim while you do up the cables is nice to have.

You NEED new brake pads. Kool Stop are among the best.

Consider replacing the brakes with modern dual pivots. The difference in braking power is amazing - one a budget, replace the front first.
Nigel
  Reply
#4
Thanks, Nigel. Good stuff to know.
(01-04-2013, 09:37 AM)Bill Wrote:  
(01-03-2013, 04:20 PM)JoeFaz Wrote:  Greetings:
New guy here again.
I will be replacing brake and shift cables on my 43 year old Raleigh Grand Prix. It's been hanging from my rafters for 20+ years, and the cables are old, dry, rusty and ready to snap. Before that happens, I'd like to replace them, but not sure where to start. Will I need any sort of special tools? Also, are there specific cables I'll need to source for this old bike? ANY advice on replacing the cables will be greatly appreciated!
TIA!

First out of love of bike mind posting a picture of your ride Smile ? Going on the picture would be helpful to see what kind of brake set you have in order for us to help determine what you are looking for.

I'll try to get some pics this weekend.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Hi
Today 10:17 AM
COLNAGO SUPER (unknown year)
Today 07:57 AM
Hallo..
Today 05:46 AM
Shifter Doesn't Have Clicking Sound
Today 12:01 AM
Looking for reliable bikes for gf and me...
Yesterday 09:03 PM
One expensive lock vs two cheaper locks?
Yesterday 10:41 AM
Sling Cycles Tagati
Yesterday 12:10 AM
What are your best biking places in your...
07-21-2021 02:30 PM
Bike won't shift gears at all, please he...
07-19-2021 07:51 AM
Crank Puller Failing to Pull Crank
07-19-2021 12:00 AM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
29 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. JR Namida
9 posts
no avatar 4. Zviedrs
6 posts
no avatar 5. Criminal
6 posts