Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Vitesse Signal Giveaway's Winner Announced


Inner tube/valve problem
#1
Hi There

I keep getting flat tyres on my front wheel. I've noticed that when I am cycling the valve is pushing to an angle, the force of this pushing with no where to go is creating a hole in the inner tube (at the join of the valve).

I've replaced quite a few inner tubes now but the same problem keeps happening.

Has anyone ever experienced this before? Is there anything I can do to keep the inner tube still in the tyre?

Thanks,
  Reply
#2
(11-13-2012, 04:29 PM)katiemaile Wrote:  Hi There

I keep getting flat tyres on my front wheel. I've noticed that when I am cycling the valve is pushing to an angle, the force of this pushing with no where to go is creating a hole in the inner tube (at the join of the valve).

I've replaced quite a few inner tubes now but the same problem keeps happening.

Has anyone ever experienced this before? Is there anything I can do to keep the inner tube still in the tyre?

Thanks,

It sounds like there is a metal sharpness what is known as a burr causing it to puncture the inner tube. Take off the tyre completely and the inner tube. If there is a rubber piece on the inside of the wheel remove it too. Feel around the area of which it gets punctured to see if this is the problem. If it is then the metal burr will need to be removed by sanding it down with sand paper or in the event it is inside the hole use a round file to lightly grind down the metal burr to a small surface.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
The things I can think of that would cause this is if you keep your tire with too low a pressure or if the tire itself just fits very loosely on the rim.

I would try higher pressure if it isn't already near the rated max. If that doesn't do it, maybe try a new tire. But if it keeps slipping like that, I suspect it's going to damage any tube. Do check for burrs as Bill mentions above, but I think you've got to stop the tire slipping around to really cure this.
  Reply
#4
Ugh Dave, I didn't think about that. Thanks for throwing that in. Glad there are other points of view. Wink
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Happy Holidays
Today 07:25 AM
What was your favourite bicycle?
Yesterday 12:33 PM
How to Trick out your Recumbent Tadpole ...
12-20-2024 09:47 AM
How many bikes do you have now?
12-20-2024 08:24 AM
Energy gels for cycling
12-20-2024 06:53 AM
New , To me ..
12-20-2024 04:06 AM
need e-trike advice (wife knee surgery)
12-20-2024 03:58 AM
Looking for Recommendations: E-Trike for...
12-20-2024 03:55 AM
How often check or change mechanical dis...
12-20-2024 03:48 AM
Ketone Ester $$$
12-20-2024 01:54 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Alexjohnson
41 posts
no avatar 2. GirishH
24 posts
no avatar 3. Flowrider
13 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. Bweighmaster
9 posts