Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Bottom Bracket install - plastic cup
#1
I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.
  Reply
#2
(04-29-2012, 07:17 AM)Ian Penna Wrote:  I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.

Very strange the tool should be the same on both sides, have you tried putting a rear QR through the axle to hold the tool in place?
  Reply
#3
(04-30-2012, 04:26 AM)swbikemedic Wrote:  
(04-29-2012, 07:17 AM)Ian Penna Wrote:  I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.

Very strange the tool should be the same on both sides, have you tried putting a rear QR through the axle to hold the tool in place?

Thanks for suggestion, axle is not hollow. Went back to local shop & bought UN26 tool & no probs. The UN52 tool I had was good for metal side but not quite right for plastic. All sorted now.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. Jesper
15 posts