Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Bottom Bracket install - plastic cup
#1
I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.
  Reply
#2
(04-29-2012, 07:17 AM)Ian Penna Wrote:  I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.

Very strange the tool should be the same on both sides, have you tried putting a rear QR through the axle to hold the tool in place?
  Reply
#3
(04-30-2012, 04:26 AM)swbikemedic Wrote:  
(04-29-2012, 07:17 AM)Ian Penna Wrote:  I am replacing my old BB with a Shimano UN26 and can't work out how to tighten the plastic cup on the left side. My tool (UN54) works fine on the chain side but not on the left. I was told at the shop that I just needed to tap the tool to make it fit the plastic cup but after destroying one plastic cup, I am at a loss. Do I need to purchase a specific tool for a plastic cup? I read that the UN26 now comes with an alloy cup that replaced the plastic version.

Very strange the tool should be the same on both sides, have you tried putting a rear QR through the axle to hold the tool in place?

Thanks for suggestion, axle is not hollow. Went back to local shop & bought UN26 tool & no probs. The UN52 tool I had was good for metal side but not quite right for plastic. All sorted now.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What are the pros and cons of clip-on pe...
03-11-2025 03:06 AM
What must-know bike care tips are we ove...
03-10-2025 08:51 PM
Cycling industry is pricing out their ow...
03-10-2025 07:59 PM
Where are you from and What is your favo...
03-10-2025 07:48 PM
The Best Bike Chain Lubes for Mountain B...
03-10-2025 06:58 PM
Would an Advanced Society Benefit from B...
03-10-2025 01:15 PM
Snow belt cyclist
03-10-2025 12:58 PM
Best suspension seat post?
03-10-2025 10:11 AM
Greetings from W.N.Y.
03-09-2025 11:27 AM
Removing and refitting rear wheel on bel...
03-09-2025 03:21 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
15 posts
no avatar 2. Flowrider
12 posts
no avatar 3. rydabent
12 posts
no avatar 4. enkei
11 posts
no avatar 5. SPINMAN
8 posts