Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Problems with gears
#1
Hey!

My bike has 3 "big gears" and 7 "small gears". At gear 2x6+7 and 3x6+7 I've encounter problems. When I try to tread too hard, it hops on and off the gear so that it makes it impossible to use those gears in anywhere else than downhill when I don't have to tread so hard.

I've tried to adjust the gears, but it doesn't seem to change anything. What should I do?
  Reply
#2
I don't really know what gear combinations you are talking about, but a chain skipping under load is a sign of chain wear. Check for it. Also note that a heavily worn chain may have worn down both the sprockets (in the rear) and the chain rings in the front. At least sprockets and chain probably need to be replaced.
  Reply
#3
The one Joe mentioned is the most likely; and you need to replace your chain and freewheel (likely you have a freewheel and not a cassette).

Less likely; one or more stiff links in the chain.

Given that the issue occurs in both the middle and large chain ring, and with both the smallest and next to smallest sprocket (cog); it is very unlikely that it is a derailleur issue.
Nigel
  Reply
#4
aha.. Thanks for the answers, though they do not lighten my heart.. It would be nice if I could fix this my self, but it seems I might have to buy either a new chain and/or freewheel(s?).. I'll do a checkup on them both to see if they have wear..
  Reply
#5
Well, replacing the chain requires a chain tool. Every cyclist should have one anyway.
Then, you need to check whether you have a cassette or a freewheel http://sheldonbrown.com/k7.html and get the correct replacement part. While it would make sense (in my opinion) to buy a cassette tool (well, if this is what you have). A freewheel tool: not so much, as there are about a bazillion different types out there and they are dying out.
Replacing the freewheel or cassette takes about... 5 minutes. Replacing the chain about the same. It is not rocket science, but as with all things: read about it first, go through the steps, follow instructions carefully if you never did it before.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
9,911
01-31-2013, 02:09 AM
Last Post: neo36uk

Forum Jump:

[-]
10 Latest Posts
Moving in Style: Beyond Regular Transpor...
Today 07:43 AM
Second wheelset for ebike.
Today 01:41 AM
Tire Sizing (Or How to Buy A Tire)
Yesterday 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
Yesterday 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. ReapThaWhirlwind
11 posts
no avatar 5. Flowrider
11 posts