BB - Binding

jrice · 07-09-2011, 06:17 PM

Recently had new bike built and had it serviced. Noticed that the mechanic tightened down the crank and afterwards the SRAM ceramic BB felt tighter and not as fluid as when I got the bike. not sure if there is a relation of the crank being tighten to the bb being bound up. Any thoughts/ suggestions?

Bill · 07-10-2011, 08:55 AM

Probably take it back to the mech and have him adjust it accordingly

10 Latest Posts
Should eBikers have to get an eBike lice... Today 07:19 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM
Are 26" really dying out? 11-05-2026 08:22 PM
Catastrophic bicycle failures 11-05-2026 08:15 PM
Our new review format – we'd like your f... 11-04-2026 05:51 AM
I've Switched To Flats... And You Should... 11-03-2026 04:46 PM
Hatch Chiles Rule! 11-03-2026 03:00 PM
Derailleur 11-02-2026 12:43 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom