Headset and Stem

EdVanSeveren · 10-14-2009, 01:34 AM

Alex, I can't seem to get my headset correct. I'm not sure if its the headset, or the stem I'm doing wrong? After all is tightened, my handlebars turn, but my wheel doesn't. Its driving me crazy! Please Help! Ed

cyclerUK · 10-14-2009, 01:24 PM

What kind of stem / headset. Is it a quill or A-head?

If it's a quill then pull it out of the steerer tube and see if the "wedge" is working O.K. (I have had a steerer tube snap and obviously it wouldn't turn, but as you lift the frame the forks would drop down.)

If it's A-head then are you tightening the side bolts at the rear of the stem? Or, there could also be a shim missing.
Have a good look at what's happening and you should be able to pin down the problem.

10 Latest Posts
Should eBikers have to get an eBike lice... Yesterday 07:15 PM
How Bad Are E-bikes By You? Yesterday 07:11 PM
Our new review format – we'd like your f... Yesterday 06:59 AM
Which one should I pick? 10-21-2026 08:09 PM
Chain skips under heavy load when pedall... 10-21-2026 07:32 PM
New rider 10-21-2026 07:07 PM
Are 26" really dying out? 10-18-2026 07:38 PM
Using ChatGPT for training 10-18-2026 07:32 PM
2026 Garmin Edge 1050 - warranty 10-18-2026 09:34 AM
Catastrophic bicycle failures 10-16-2026 01:36 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom